User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- Chapter 3: Motherboard Information
- Chapter 4: BIOS Setup
- 4.1 Introduction to the BIOS
- 4.2 BIOS setup program
- 4.3 My Favorites
- 4.4 Main menu
- 4.5 Advanced menu
- 4.5.1 Platform Misc Configuration
- 4.5.2 CPU Configuration
- 4.5.3 System Agent (SA) Configuration
- 4.5.4 PCH Configuration
- 4.5.5 PCH Storage Configuration
- 4.5.6 PCH-FW Configuration
- 4.5.7 AMT Configuration
- 4.5.8 Thunderbolt(TM) Configuration
- 4.5.9 Serial Port Console Redirection
- 4.5.10 Intel TXT Information
- 4.5.11 PCI Subsystem Settings
- 4.5.12 USB Configuration
- 4.5.13 Network Stack Configuration
- 4.5.14 NVMe Configuration
- 4.5.15 HDD/SSD SMART Information
- 4.5.16 APM Configuration
- 4.5.17 Onboard Devices Configuration
- 4.5.18 Intel(R) Rapid Storage Technology
- 4.6 Monitor menu
- 4.7 Boot menu
- 4.8 Tool menu
- 4.9 Exit menu
- 4.10 Updating BIOS
- Chapter 5: RAID Configuration
- Appendix
ASUS E500 G9
4-43
Chassis Fan 1-3 Middle. Duty Cycle (%)
Set the middle fan/pump duty cycle of the assigned fan/pump for when the
source temp. exceeds the middle temperature. We suggest raising your
fan/pump duty to 100% if your CPU temperature exceeds 75°C. Please be
noted CPU performance will throttle due to overheating with inefficient fan/
pump duty. Use the <+> or <-> keys to adjust the fan/pump middle duty
cycle.
Chassis Fan 1-3 Lower Temperature
Configure the fan/pump lower temperature to make assigned fan/pump
operate at the min. duty cycle when the source temperature is lower than
the limit. We suggest raising your fan/pump duty to 100% if your CPU
temperature exceeds 75°C. Please be noted CPU performance will throttle
due to overheating with inefficient fan/pump duty. Use the <+> or <-> keys
to adjust the lower temperature.
Chassis Fan 1-3 Min. Duty Cycle(%)
Set the middle fan/pump duty cycle of the assigned fan/pump for when the
source temp. is lower than the lower temperature. We suggest raising your
fan/pump duty to 100% if your CPU temperature exceeds 75°C. Please be
noted CPU performance will throttle due to overheating with inefficient fan/
pump duty. Use the <+> or <-> keys to adjust the fan/pump minimum duty
cycle.
AIO Pump Q-Fan Control
Allows you to set the AIO Pump operating mode.
[Auto Detect] Detects the type of installed fan/pump and automatically switches
the control modes.
[DC Mode] Enables the Q-Fan Control feature in DC mode for 3-pin fan/pump.
[PWM Mode] Enables the Q-Fan Control feature in PWM mode for 4-pin fan/
pump.
AIO Pump Profile
Allows you to set the appropriate performance level of the assigned fan/pump. When
selecting [Manual], we suggest raising your fan/pump duty to 100% if your CPU
temperature exceeds 75°C. Please be noted CPU performance will throttle due to
overheating with inefficient fan/pump duty.
Configuration options: [Standard] [Silent] [Turbo] [Full Speed] [Manual]
The following items appear only when
AIO Pump Profile
is set to
[Standard]
,
[Silent]
,
[Turbo]
, or
[Manual]
.
AIO Pump Q-Fan Source
The assigned fan/pump will be controlled according to the selected temperature
source.
Configuration options: [CPU] [MotherBoard] [VRM Thermistor] [Chipset] [T_Sensor]
[Multiple Sources]