User Manual
Table Of Contents
- 目录
- 使用注意事项
- 用电安全
- 关于本用户手册
- 第一章:系统导览
- 第二章:硬件安装
- 第三章:主板信息
- 第四章:BIOS 程序设置
- 4.1 认识 BIOS 程序
- 4.2 BIOS 程序设置
- 4.3 我的最爱(My Favorites)菜单
- 4.4 主菜单(Main)
- 4.5 高级菜单(Advanced menu)
- 4.5.1 平台各项设置(Platform Misc Configuration)
- 4.5.2 CPU 设置(CPU Configuration)
- 4.5.3 系统代理设置(System Agent Configuration)
- 4.5.4 PCH 设置(PCH Configuration)
- 4.5.5 PCH 储存设备设置(PCH Storage Configuration)
- 4.5.6 PCH-FW 设置(PCH-FW Configuration)
- 4.5.7 AMT 设置(AMT Configuration)
- 4.5.8 Thunderbolt(TM) 设置(Thunderbolt(TM) Configuration)
- 4.5.9 串口控制面板重新定向(Serial Port Console Redirection)
- 4.5.10 Intel TXT 信息(Intel TXT Information)
- 4.5.11 PCI 子系统设置(PCI Subsystem Settings)
- 4.5.12 USB 设置(USB Configuration)
- 4.5.13 网络协定堆栈设置(Network Stack Configuration)
- 4.5.14 NVMe 设置(NVMe Configuration)
- 4.5.15 HDD/SSD SMART 信息(HDD/SSD SMART Information)
- 4.5.16 APM 设置(APM Configuration)
- 4.5.17 内置设备设置(OnBoard Devices Configuration)
- 4.5.18 Intel® 快速保存技术(Intel(R) Rapid Storage Technology)
- 4.6 监控菜单(Monitor menu)
- 4.7 启动菜单(Boot menu)
- 4.8 工具菜单(Tool menu)
- 4.9 退出 BIOS 程序(Exit menu)
- 4.10 更新 BIOS 程式(Updating BIOS)
- 第五章:磁盘阵列设置
- 附录
華碩 E500 G9 用戶手冊
A-3
Q-Code 列表
(下一頁繼續)
Code Description
00 Not used
02 microcode
03 CACHE_ENABLED
04 PCH initialization
06 CPU_EARLY_INIT
10 PEI Core is started
11 – 14 Pre-memory CPU initialization is started
15 – 18 Pre-memory System Agent initialization is started
19 – 1C Pre-memory PCH initialization is started
2B – 2F Memory initialization
30 Reserved for ASL (see ASL Status Codes section below)
31 Memory Installed
32 – 36 CPU post-memory initialization
37 – 3A Post-Memory System Agent initialization is started
3B – 3E Post-Memory PCH initialization is started
4F DXE IPL is started
50 – 53 Memory initialization error. Invalid memory type or incompatible memory speed
4F DXE IPL is started
54 Unspecified memory initialization error
55 Memory not installed
56 Invalid CPU type or Speed
57 CPU mismatch
58 CPU self test failed or possible CPU cache error
59 CPU micro-code is not found or micro-code update is failed
5A Internal CPU error
5B Reset PPI is not available
5C – 5F Reserved for future AMI error codes
E0 S3 Resume is stared (S3 Resume PPI is called by the DXE IPL)
E1 S3 Boot Script execution
E2 Video repost
E3 OS S3 wake vector call
E4 – E7 Reserved for future AMI progress codes
E8 S3 Resume Failed
E9 S3 Resume PPI not Found
EA S3 Resume Boot Script Error
EB S3 OS Wake Error
EC – EF Reserved for future AMI error codes
F0 Recovery condition triggered by firmware (Auto recovery)
F1 Recovery condition triggered by user (Forced recovery)
F2 Recovery process started
F3 Recovery firmware image is found