User Manual
Table Of Contents
- 目录
- 使用注意事项
- 用电安全
- 关于本用户手册
- 第一章:系统导览
- 第二章:硬件安装
- 第三章:主板信息
- 第四章:BIOS 程序设置
- 4.1 认识 BIOS 程序
- 4.2 BIOS 程序设置
- 4.3 我的最爱(My Favorites)菜单
- 4.4 主菜单(Main)
- 4.5 高级菜单(Advanced menu)
- 4.5.1 平台各项设置(Platform Misc Configuration)
- 4.5.2 CPU 设置(CPU Configuration)
- 4.5.3 系统代理设置(System Agent Configuration)
- 4.5.4 PCH 设置(PCH Configuration)
- 4.5.5 PCH 储存设备设置(PCH Storage Configuration)
- 4.5.6 PCH-FW 设置(PCH-FW Configuration)
- 4.5.7 AMT 设置(AMT Configuration)
- 4.5.8 Thunderbolt(TM) 设置(Thunderbolt(TM) Configuration)
- 4.5.9 串口控制面板重新定向(Serial Port Console Redirection)
- 4.5.10 Intel TXT 信息(Intel TXT Information)
- 4.5.11 PCI 子系统设置(PCI Subsystem Settings)
- 4.5.12 USB 设置(USB Configuration)
- 4.5.13 网络协定堆栈设置(Network Stack Configuration)
- 4.5.14 NVMe 设置(NVMe Configuration)
- 4.5.15 HDD/SSD SMART 信息(HDD/SSD SMART Information)
- 4.5.16 APM 设置(APM Configuration)
- 4.5.17 内置设备设置(OnBoard Devices Configuration)
- 4.5.18 Intel® 快速保存技术(Intel(R) Rapid Storage Technology)
- 4.6 监控菜单(Monitor menu)
- 4.7 启动菜单(Boot menu)
- 4.8 工具菜单(Tool menu)
- 4.9 退出 BIOS 程序(Exit menu)
- 4.10 更新 BIOS 程式(Updating BIOS)
- 第五章:磁盘阵列设置
- 附录
華碩 E500 G9 用戶手冊
4-15
4.5.1 平台各項設置(Platform Misc Configuration)
本項目用來設置與平台相關的功能。
PCI Express Native Power Management
將本項目設置為 [Enabled]時,可提升 PCI Express 的省電功能及操作系統的
ASPM 功能。設置值有:[Disabled] [Enabled]
以下項目只有在 PCI Express Native Power Management 設置為 [Enabled]
時才會出現。
Native ASPM
針對 OS Controlled ASPM,將本項目設置為 [Enabled] 或針對 BIOS 控制的
ASPM,將本項目設置為 [Disabled]。設置值有:[Auto] [Enabled] [Disabled]
PCH - PCI Express
DMI Link ASPM Control
本項目可讓您控制 DMI Link 上北橋(NB)與南橋(SB)的 Active State Power
Management(ASPM)。設置值有:[Disabled] [L1] [Auto]
ASPM
本項目用來選擇 ASPM state 的節能狀態。設置值有:[Disabled] [L1] [Auto]
L1 Substates
本項目可選擇設置 PCI Express L1 Substates。設置值有:[Disabled] [L1.1] [L1.1
& L1.2]