User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- Chapter 3: Motherboard Information
- Chapter 4: BIOS Setup
- 4.1 Introduction to the BIOS
- 4.2 BIOS setup program
- 4.3 My Favorites
- 4.4 Main menu
- 4.5 Advanced menu
- 4.5.1 Platform Misc Configuration
- 4.5.2 CPU Configuration
- 4.5.3 System Agent (SA) Configuration
- 4.5.4 PCH Configuration
- 4.5.5 PCH Storage Configuration
- 4.5.6 PCH-FW Configuration
- 4.5.7 AMT Configuration
- 4.5.8 Thunderbolt(TM) Configuration
- 4.5.9 Serial Port Console Redirection
- 4.5.10 Intel TXT Information
- 4.5.11 PCI Subsystem Settings
- 4.5.12 USB Configuration
- 4.5.13 Network Stack Configuration
- 4.5.14 NVMe Configuration
- 4.5.15 HDD/SSD SMART Information
- 4.5.16 APM Configuration
- 4.5.17 Onboard Devices Configuration
- 4.5.18 Intel(R) Rapid Storage Technology
- 4.6 Monitor menu
- 4.7 Boot menu
- 4.8 Tool menu
- 4.9 Exit menu
- 4.10 Updating BIOS
- Chapter 5: RAID Configuration
- Appendix
5-12
Chapter 5: RAID Conguration
4. A message appears, reminding you to insert the installation media containing the driver
of the RAID controller driver. Click
Browse
to continue.
• If you have only one optical drive installed in your system, eject the Windows OS
installation disc and replace it with the motherboard Support DVD.
• If you created a SATA RAID set and cannot use the optical drive, or if you do not have
an optical drive, you can use another computer with an optical drive to copy the RAID
driver from the support DVD to a USB ash drive.
5. Locate the driver in the corresponding folder of the Support DVD or the USB ash drive
with RAID driver, then click OK to continue.
6. Select the RAID controller driver you need from the list and click Next.
7. When the system nishes loading the RAID driver, select the drive to install Windows
and click Next.
If you have ejected the Windows OS installation disc in a previous step, ensure to replace
the motherboard Support DVD with the Windows OS installation disc.
8. Setup then proceeds with the OS installation. Follow screen instructions to complete.