User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- Chapter 3: Motherboard Information
- Chapter 4: BIOS Setup
- 4.1 Introduction to the BIOS
- 4.2 BIOS setup program
- 4.3 My Favorites
- 4.4 Main menu
- 4.5 Advanced menu
- 4.5.1 Platform Misc Configuration
- 4.5.2 CPU Configuration
- 4.5.3 System Agent (SA) Configuration
- 4.5.4 PCH Configuration
- 4.5.5 PCH Storage Configuration
- 4.5.6 PCH-FW Configuration
- 4.5.7 AMT Configuration
- 4.5.8 Thunderbolt(TM) Configuration
- 4.5.9 Serial Port Console Redirection
- 4.5.10 Intel TXT Information
- 4.5.11 PCI Subsystem Settings
- 4.5.12 USB Configuration
- 4.5.13 Network Stack Configuration
- 4.5.14 NVMe Configuration
- 4.5.15 HDD/SSD SMART Information
- 4.5.16 APM Configuration
- 4.5.17 Onboard Devices Configuration
- 4.5.18 Intel(R) Rapid Storage Technology
- 4.6 Monitor menu
- 4.7 Boot menu
- 4.8 Tool menu
- 4.9 Exit menu
- 4.10 Updating BIOS
- Chapter 5: RAID Configuration
- Appendix
vii
About this guide
Audience
This user guide is intended for system integrators, and experienced users with at least basic
knowledge of conguring a server.
Contents
This guide contains the following parts:
1. Chapter 1: Product Introduction
This chapter describes the general features of the server, including sections on front
panel and rear panel specications.
2. Chapter 2: Hardware Setup
This chapter lists the hardware setup procedures that you have to perform when
installing or removing system components.
3. Chapter 3: Motherboard Information
This chapter includes the motherboard layout and brief descriptions of the jumpers and
internal connectors.
4. Chapter 4: BIOS Setup
This chapter tells how to change system settings through the BIOS Setup menus and
describes the BIOS parameters.
5. Chapter 5: RAID Configuration
This chapter provides instructions for setting up, creating and conguring RAID sets
using the available utilities.