User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- Chapter 3: Motherboard Information
- Chapter 4: BIOS Setup
- 4.1 Knowing BIOS
- 4.2 BIOS setup program
- 4.3 My Favorites
- 4.4 Main menu
- 4.5 Ai Tweaker menu
- 4.6 Advanced menu
- 4.6.1 Platform Misc Configuration
- 4.6.2 CPU Configuration
- 4.6.3 System Agent (SA) Configuration
- 4.6.4 PCH Configuration
- 4.6.5 PCH Storage Configuration
- 4.6.6 PCH-FW Configuration
- 4.6.7 AMT Configuration
- 4.6.8 Thunderbolt(TM) Configuration
- 4.6.9 Serial Port Console Redirection
- 4.6.10 Intel TXT Information
- 4.6.11 PCI Subsystem Settings
- 4.6.12 USB Configuration
- 4.6.13 Network Stack Configuration
- 4.6.14 NVMe Configuration
- 4.6.15 HDD/SSD SMART Information
- 4.6.16 APM Configuration
- 4.6.17 Onboard Devices Configuration
- 4.6.18 Intel(R) Rapid Storage Technology
- 4.7 Monitor menu
- 4.8 Boot menu
- 4.9 Tool menu
- 4.10 Exit menu
- 4.11 Updating BIOS
- Chapter 5: RAID Configuration
- Appendix
4-32
Chapter 4: BIOS Setup
System Agent PLL Voltage
Allows you to configure the offset for the System Agent PLL VCC Trim. Use the <+>
and <-> keys to adjust the value. The values range from 0.900V to 1.845V with an
interval of 0.015V.
Configuration options: [Auto] [0.90000] - [1.84500]
Memory Controller PLL Voltage
Allows you to configure the offset for the Memory Controller PLL VCC Trim. Use the
<+> and <-> keys to adjust the value. The values range from 0.900V to 1.845V with an
interval of 0.015V.
Configuration options: [Auto] [0.90000] - [1.84500]
CPU 1.8V Small Rail
Allows you to configure the voltage for the CPU 1.8V Small Rail. Use the <+> and <->
keys to adjust the value. The values range from 1.500V to 2.300V with an interval of
0.010V.
Configuration options: [Auto] [1.50000] - [2.30000]
PLL Termination Voltage
Allows you to configure the voltage for the PLL Termination. Use the <+> and <-> keys
to adjust the value. The values range from 0.800V to 1.800V with an interval of 0.010V.
Configuration options: [Auto] [0.80000V] - [1.80000V]
CPU Standby Voltage
Allows you to configure the voltage for the CPU Standby. Use the <+> and <-> keys to
adjust the value. The values range from 0.800V to 1.800V with an interval of 0.010V.
Configuration options: [Auto] [0.80000] - [1.80000]
PCH 1.05V Voltage
Allows you to configure the voltage for the PCH 1.05V. Use the <+> and <-> keys to
adjust the value. The values range from 0.800V to 1.600V with an interval of 0.010V.
Configuration options: [Auto] [0.80000] - [1.60000]
PCH 0.82V Voltage
Allows you to configure the voltage for the PCH 0.82V. Use the <+> and <-> keys to
adjust the value. The values range from 0.700V to 1.300V with an interval of 0.010V.
Configuration options: [Auto] [0.70000] - [1.30000]
CPU Input Voltage Reset Voltage
Allows you to configure the voltage for the CPU Input when reset. Use the <+> and <->
keys to adjust the value. The values range from 1.500V to 2.100V with an interval of
0.010V.
Configuration options: [Auto] [1.50000] - [2.10000]
Min. CPU Cache Ratio
Allows you to set the minimum possible CPU cache ratio. Use the <+> and <-> keys to adjust
the value.
Configuration options: [Auto] [8] - [51]
Max. CPU Cache Ratio
Allows you to set the maximum possible CPU cache ratio. Use the <+> and <-> keys to
adjust the value.
Configuration options: [Auto] [8] - [51]