User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- Chapter 3: Motherboard Information
- Chapter 4: BIOS Setup
- 4.1 Knowing BIOS
- 4.2 BIOS setup program
- 4.3 My Favorites
- 4.4 Main menu
- 4.5 Ai Tweaker menu
- 4.6 Advanced menu
- 4.6.1 Platform Misc Configuration
- 4.6.2 CPU Configuration
- 4.6.3 System Agent (SA) Configuration
- 4.6.4 PCH Configuration
- 4.6.5 PCH Storage Configuration
- 4.6.6 PCH-FW Configuration
- 4.6.7 AMT Configuration
- 4.6.8 Thunderbolt(TM) Configuration
- 4.6.9 Serial Port Console Redirection
- 4.6.10 Intel TXT Information
- 4.6.11 PCI Subsystem Settings
- 4.6.12 USB Configuration
- 4.6.13 Network Stack Configuration
- 4.6.14 NVMe Configuration
- 4.6.15 HDD/SSD SMART Information
- 4.6.16 APM Configuration
- 4.6.17 Onboard Devices Configuration
- 4.6.18 Intel(R) Rapid Storage Technology
- 4.7 Monitor menu
- 4.8 Boot menu
- 4.9 Tool menu
- 4.10 Exit menu
- 4.11 Updating BIOS
- Chapter 5: RAID Configuration
- Appendix
4-34
Chapter 4: BIOS Setup
The following items appear only when
CPU Graphics Voltage
is set to
[Offset Mode]
.
Offset Mode Sign
[+] To offset the voltage by a positive value.
[–] To offset the voltage by a negative value.
CPU Graphics Voltage Offset
Allows you to configure the CPU graphics voltage offset value. Use the <+> or <-> to adjust
the value. The values range from 0.005V to 0.635V with an interval of 0.005V.
Configuration options: [Auto] [0.00500] - [0.63500]
You need to save the changes and reset the system for the changes to take effect.
CPU L2 Voltage
Allows you to configure the voltage for the CPU L2. This may help for sustaining high clock
speeds.
Configuration options: [Auto] [Manual Mode]
The following item appears only when
CPU L2 Voltage
is set to
[Manual Mode]
.
CPU L2 Voltage Override
Allows you to configure the voltage for the CPU L2. Use the <+> or <-> to adjust the value.
The values range from 0.700V to 1.800V with an interval of 0.001V.
Configuration options: [Auto] [0.70000] - [1.80000]
CPU System Agent Voltage
Allows you to configure the voltage for the CPU System Agent.
Configuration options: [Auto] [Manual Mode] [Offset Mode]
The following item appears only when
CPU System Agent Voltage
is set to
[Manual
Mode]
.
CPU System Agent Voltage Override
Allows you to configure the input voltage for the CPU by the external voltage regulator. Use
the <+> and <-> keys to adjust the value. The values range from 0.700V to 1.800V with an
interval of 0.001V.
Configuration options: [Auto] [0.70000] - [1.80000]