User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- Chapter 3: Motherboard Information
- Chapter 4: BIOS Setup
- 4.1 Knowing BIOS
- 4.2 BIOS setup program
- 4.3 My Favorites
- 4.4 Main menu
- 4.5 Ai Tweaker menu
- 4.6 Advanced menu
- 4.6.1 Platform Misc Configuration
- 4.6.2 CPU Configuration
- 4.6.3 System Agent (SA) Configuration
- 4.6.4 PCH Configuration
- 4.6.5 PCH Storage Configuration
- 4.6.6 PCH-FW Configuration
- 4.6.7 AMT Configuration
- 4.6.8 Thunderbolt(TM) Configuration
- 4.6.9 Serial Port Console Redirection
- 4.6.10 Intel TXT Information
- 4.6.11 PCI Subsystem Settings
- 4.6.12 USB Configuration
- 4.6.13 Network Stack Configuration
- 4.6.14 NVMe Configuration
- 4.6.15 HDD/SSD SMART Information
- 4.6.16 APM Configuration
- 4.6.17 Onboard Devices Configuration
- 4.6.18 Intel(R) Rapid Storage Technology
- 4.7 Monitor menu
- 4.8 Boot menu
- 4.9 Tool menu
- 4.10 Exit menu
- 4.11 Updating BIOS
- Chapter 5: RAID Configuration
- Appendix
ASUS E500 G9
4-37
DRAM Current Capability
Allows you to set the current capability for the switching regulators in Amps. Use the
<+> or <-> to adjust the value. The values range from 0.125A to 7.875A with an interval
of 0.125A.
Configuration options: [Auto] [0.12500] - [7.87500]
The following items appear only when
PMIC Voltages
is set to
[By per PMIC]
.
PMIC0-3 SPD HUB VLDO (1.8V)
Allows you to set the main power for the SPD Hub Logic. Default set to 1.8V. Use the
<+> or <-> to adjust the value. The values range from 1.700V to 2.000V with an interval
of 0.100V.
Configuration options: [Auto] [1.70000] - [2.00000]
PMIC0-3 SPD HUB VDDIO (1.0V)
Allows you to set the main power for the SPD Hub side-band interface. Default set to
1.0V. Use the <+> or <-> to adjust the value. The values range from 0.900V to 1.200V
with an interval of 0.100V.
Configuration options: [Auto] [0.90000] - [1.20000]
PMIC0-3 DRAM VDD Voltage
Allows you to set the power for the DRAM IC’s VDD portion. Use the <+> or <-> to
adjust the value. The values range from 0.800V to 1.435V with an interval of 0.005V.
Configuration options: [Auto] [0.80000] - [1.43500]
PMIC0-3 DRAM VDDQ Voltage
Allows you to set the power for the DRAM IC’s Data portion. Use the <+> or <-> to
adjust the value. The values range from 0.800V to 1.435V with an interval of 0.005V.
Configuration options: [Auto] [0.80000] - [1.43500]
PMIC0-3 DRAM VPP Voltage
Allows you to set the power for the DRAM Activating Power Supply. Use the <+> or <->
to adjust the value. The values range from 1.500V to 2.135V with an interval of 0.005V.
Configuration options: [Auto] [1.50000] - [2.13500]
PMIC0-3 DRAM VDD Switching Frequency
Allows you to set the switching frequency of memory VDD regulator in MHz. Use the
<+> or <-> to adjust the value. The values range from 0.750MHz to 1.500MHz with an
interval of 0.250MHz.
Configuration options: [Auto] [0.75000] - [1.50000]
PMIC0-3 DRAM VDDQ Switching Frequency
Allows you to set the switching frequency of memory VDDQ regulator in MHz. Use the
<+> or <-> to adjust the value. The values range from 0.750MHz to 1.500MHz with an
interval of 0.250MHz.
Configuration options: [Auto] [0.75000] - [1.50000]
PMIC0-3 DRAM VPP Switching Frequency
Allows you to set the switching frequency of memory VPP regulator in MHz. Use the
<+> or <-> to adjust the value. The values range from 0.750MHz to 1.500MHz with an
interval of 0.250MHz.
Configuration options: [Auto] [0.75000] - [1.50000]