User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- Chapter 3: Motherboard Information
- Chapter 4: BIOS Setup
- 4.1 Knowing BIOS
- 4.2 BIOS setup program
- 4.3 My Favorites
- 4.4 Main menu
- 4.5 Ai Tweaker menu
- 4.6 Advanced menu
- 4.6.1 Platform Misc Configuration
- 4.6.2 CPU Configuration
- 4.6.3 System Agent (SA) Configuration
- 4.6.4 PCH Configuration
- 4.6.5 PCH Storage Configuration
- 4.6.6 PCH-FW Configuration
- 4.6.7 AMT Configuration
- 4.6.8 Thunderbolt(TM) Configuration
- 4.6.9 Serial Port Console Redirection
- 4.6.10 Intel TXT Information
- 4.6.11 PCI Subsystem Settings
- 4.6.12 USB Configuration
- 4.6.13 Network Stack Configuration
- 4.6.14 NVMe Configuration
- 4.6.15 HDD/SSD SMART Information
- 4.6.16 APM Configuration
- 4.6.17 Onboard Devices Configuration
- 4.6.18 Intel(R) Rapid Storage Technology
- 4.7 Monitor menu
- 4.8 Boot menu
- 4.9 Tool menu
- 4.10 Exit menu
- 4.11 Updating BIOS
- Chapter 5: RAID Configuration
- Appendix
ASUS E500 G9
4-43
Turbo Mode
Allows you to automatically set the CPU cores to run faster than the base operating
frequency when it is below the operating power, current and temperature specification
limit.
Configuration options: [Disabled] [Enabled]
Acoustic Noise Settings
The items in this submenu allow you to configure Acoustic Noise Settings for IA, GT,
and SA domains.
Acoustic Noise Settings
Acoustic Noise Mitigation
Enabling this option will help mitigate acoustic noise on certain SKUs when
the CPU is in deeper C state.
Configuration options: [Disabled] [Enabled]
The following items appear only when Acoustic Noise Mitigation is set to
[Enabled]
.
Pre Wake Time
Allows you to set the maximum Pre Wake randomization time in micro ticks.
This is for acoustic noise mitigation Dynamic Periodicity Alteration (DPA)
tuning. Use the <+> or <-> to adjust the value.
Configuration options: [0] - [255]
Ramp Up Time
Allows you to set the maximum Ramp Up randomization time in micro ticks.
This is for acoustic noise mitigation Dynamic Periodicity Alteration (DPA)
tuning. Use the <+> or <-> to adjust the value.
Configuration options: [0] - [255]
Ramp Down Time
Allows you to set the maximum Ramp Down randomization time in micro
ticks. This is for acoustic noise mitigation Dynamic Periodicity Alteration
(DPA) tuning. Use the <+> or <-> to adjust the value.
Configuration options: [0] - [255]
IA VR Domain
Disable Fast PKG C State Ramp for IA Domain
This option needs to be configured to reduce acoustic noise during deeper
C states.
[FALSE] Don’t disable Fast ramp during deeper C states.
[TRUE] Disable Fast ramp during deeper C state.
Slow Slew Rate for IA Domain
Set VR IA Slow Slew Rate for Deep Package C State ramp time; Slow slew
rate equals to Fast divided by number, the number is 2, 4, 8 to slow down
the slew rate to help minimize acoustic noise.
Configuration options: [Fast/2] [Fast/4] [Fast/8]
GT VR Domain
Disable Fast PKG C State Ramp for GT Domain
This option needs to be configured to reduce acoustic noise during deeper
C states.
[FALSE] Don’t disable Fast ramp during deeper C states.
[TRUE] Disable Fast ramp during deeper C state.