User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- Chapter 3: Motherboard Information
- Chapter 4: BIOS Setup
- 4.1 Knowing BIOS
- 4.2 BIOS setup program
- 4.3 My Favorites
- 4.4 Main menu
- 4.5 Ai Tweaker menu
- 4.6 Advanced menu
- 4.6.1 Platform Misc Configuration
- 4.6.2 CPU Configuration
- 4.6.3 System Agent (SA) Configuration
- 4.6.4 PCH Configuration
- 4.6.5 PCH Storage Configuration
- 4.6.6 PCH-FW Configuration
- 4.6.7 AMT Configuration
- 4.6.8 Thunderbolt(TM) Configuration
- 4.6.9 Serial Port Console Redirection
- 4.6.10 Intel TXT Information
- 4.6.11 PCI Subsystem Settings
- 4.6.12 USB Configuration
- 4.6.13 Network Stack Configuration
- 4.6.14 NVMe Configuration
- 4.6.15 HDD/SSD SMART Information
- 4.6.16 APM Configuration
- 4.6.17 Onboard Devices Configuration
- 4.6.18 Intel(R) Rapid Storage Technology
- 4.7 Monitor menu
- 4.8 Boot menu
- 4.9 Tool menu
- 4.10 Exit menu
- 4.11 Updating BIOS
- Chapter 5: RAID Configuration
- Appendix
ASUS E500 G9
4-65
CPU Fan Middle. Duty Cycle (%)
Set the middle fan/pump duty cycle of the assigned fan/pump for when the source
temp. exceeds the middle temperature. We suggest raising your fan/pump duty to
100% if your CPU temperature exceeds 75°C. Please be noted CPU performance will
throttle due to overheating with inefficient fan/pump duty. Use the <+> or <-> keys to
adjust the fan/pump middle duty cycle.
CPU Fan Lower Temperature
Configure the fan/pump lower temperature to make assigned fan/pump operate at the
min. duty cycle when the source temperature is lower than the limit. We suggest raising
your fan/pump duty to 100% if your CPU temperature exceeds 75°C. Please be noted
CPU performance will throttle due to overheating with inefficient fan/pump duty. Use
the <+> or <-> keys to adjust the lower temperature.
CPU Fan Min. Duty Cycle(%)
Set the middle fan/pump duty cycle of the assigned fan/pump for when the source
temp. is lower than the lower temperature. We suggest raising your fan/pump duty to
100% if your CPU temperature exceeds 75°C. Please be noted CPU performance will
throttle due to overheating with inefficient fan/pump duty. Use the <+> or <-> keys to
adjust the fan/pump minimum duty cycle.
Chassis Fan(s) Configuration
Chassis Fan 1-3 Q-Fan Control
Allows you to set the Chassis Fan 1-3 operating mode.
[Auto Detect] Detects the type of installed fan/pump and automatically
switches the control modes.
[DC Mode] Enables the Q-Fan Control feature in DC mode for 3-pin fan/
pump.
[PWM Mode] Enables the Q-Fan Control feature in PWM mode for 4-pin fan/
pump.
Chassis Fan 1-3 Profile
Allows you to set the appropriate performance level of the assigned fan/
pump. When selecting
[Manual]
, we suggest raising your fan/pump duty
to 100% if your CPU temperature exceeds 75°C. Please be noted CPU
performance will throttle due to overheating with inefficient fan/pump duty.
Configuration options: [Standard] [Silent] [Turbo] [Full Speed] [Manual]
The following items appear only when
CPU Fan 1-3 Profil
e is set to
[Standard]
,
[Silent]
,
[Turbo]
, or
[Manual]
.
Chassis Fan 1-3 Q-Fan Source
The assigned fan/pump will be controlled according to the selected
temperature source.
Configuration options: [CPU] [MotherBoard] [VRM Thermistor] [Chipset] [T_
Sensor] [Multiple Sources]
For Multiple Sources, select up to three temperature sources and the fan will automatically
change based on the highest temperature.