User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- Chapter 3: Motherboard Information
- Chapter 4: BIOS Setup
- 4.1 Knowing BIOS
- 4.2 BIOS setup program
- 4.3 My Favorites
- 4.4 Main menu
- 4.5 Ai Tweaker menu
- 4.6 Advanced menu
- 4.6.1 Platform Misc Configuration
- 4.6.2 CPU Configuration
- 4.6.3 System Agent (SA) Configuration
- 4.6.4 PCH Configuration
- 4.6.5 PCH Storage Configuration
- 4.6.6 PCH-FW Configuration
- 4.6.7 AMT Configuration
- 4.6.8 Thunderbolt(TM) Configuration
- 4.6.9 Serial Port Console Redirection
- 4.6.10 Intel TXT Information
- 4.6.11 PCI Subsystem Settings
- 4.6.12 USB Configuration
- 4.6.13 Network Stack Configuration
- 4.6.14 NVMe Configuration
- 4.6.15 HDD/SSD SMART Information
- 4.6.16 APM Configuration
- 4.6.17 Onboard Devices Configuration
- 4.6.18 Intel(R) Rapid Storage Technology
- 4.7 Monitor menu
- 4.8 Boot menu
- 4.9 Tool menu
- 4.10 Exit menu
- 4.11 Updating BIOS
- Chapter 5: RAID Configuration
- Appendix
ASUS E500 G9
4-15
BCLK Frequency : DRAM Frequency Ratio
[Auto] The BCLK frequency to DRAM frequency ratio will be set to the optimized
setting.
[100:133] The BCLK frequency to DRAM frequency ratio will be set to 100:133.
[100:100] The BCLK frequency to DRAM frequency ratio will be set to 100:100.
Memory Controller : DRAM Frequency Ratio
BCLK Frequency: DRAM Frequency Ratio of 100:133 tends to overclock better and 1:2
Memory Controller: DRAM Frequency Ratio only works with even numbered DRAM Ratios
and not odd numbered ratios.
Configuration options: [Auto] [1:1] [1:2] [1:4]
Performance Core Ratio
[Auto] The system will adjust all Performance core ratios automatically.
[Sync All Cores] Configure a core ratio limit to synchronize all Performance cores.
[By Core Usage] Configure the ratio limits for active cores depending on how many
Performance cores are being utilized.
[AI Optimized] Use AI to optimize the Performance core ratios.
• The
[AI Optimized]
item appears only when you use an unlocked CPU.
• The following item appears only when
Performance Core Ratio
is set to
[Sync All
Cores]
.
ALL-Core Ratio Limit
Enter [Auto] to apply the CPU default Turbo Ratio setting or manually assign a Core ratio limit
to synchronize all cores. Use the <+> or <-> to adjust the value.
Configuration options: [Auto] [8] - [47]
The following items appear only when
Performance Core Ratio
is set to
[By Core Usage]
.
1-Core Ratio Limit / 2-Core Ratio Limit / 3-Core Ratio Limit / 4-Core Ratio
Limit / 5-Core Ratio Limit / 6-Core Ratio Limit / 7-Core Ratio Limit / 8-Core
Ratio Limit
The N-core ratio limit must be higher than or equal to the (N+1)-core ratio limit. (N stands for
the number of CPU cores) The core ratio limit cannot be set to [Auto] when the core number
is lower than N. The biggest core’s ratio limit must be lower than or equal to the second
biggest core’s ratio limit. Use the <+> or <-> to adjust the value.
Configuration options: [Auto] [24] - [51]
The following item appears only when
Performance Core Ratio
is set to
[AI Optimized]
.
Optimized AVX Frequency
Select [Normal Use] for typical use cases, or select [Heavy AVX] for extreme loads such as
Prime 95 AVX.
Configuration options: [Normal Use] [Heavy AVX]