User`s manual

ASUS Xonar DX

For other applications that support ASIO, such as WaveLab, Cubase, Reason,

Winamp, etc, the setup will be very similar to the above.

No Item Description

1 Audio Options

Step 1 is to open the “Audio Options” window from the

Options tab.

2 Driver Mode

Step 2 is to select “ASIO” as the driver mode in Advanced

tab. (WDM and MME are Windows driver types) The

changes will take effect after you restart the program next

time.

3 Playback Timing

Master

After step 2, Sonar LE will display 4 output drivers: “ASUS

Xonar DX ASIO Out -00~06”. Make sure you are using 00 or

another one.

4 Recording Timing

Master

After step 2, Sonar LE will display 1 input driver: “ASUS

Xonar DX ASIO In -00”. Make sure you are using it.

5 Sample Rate

Step 5 is to select the default le sample rate (44.1, 48, 96,

or 192KHz) for your Sonar project.

6 ASIO Panel

If you would like to congure bit-depth (16/24bit) and latency

(1ms~300ms) of the Xonar DX ASIO driver, click this ASIO

panel to reset them. The changes will take effect the next

time you start the program.