Instruction Manual

39Notebook PC User’s Manual
IV. BIOS Software
Main Sub-Menu (Cont’)
IDE Primary Slave
In this field, indicate the size of the disk drive or the device type, such as a CD-ROM drive. The arrow head icon
indicates that this field contains a sub-menu. The sub-menu is used to configure the IDE Hard Disk installed in the
system.
To configure a hard disk drive, move the cursor to highlight the IDE Primary Slave field, and press [Enter]. The sub-
menu screen will appear. The fields and options on this sub-menu are the same as the Primary Master sub-menu de-
scribed earlier. Set the type as CD-ROM in this field to support an inserted CD-ROM or DVD drive module and
Removable ATAPI to support an inserted storage device module with an IDE interface as the primary slave.
After using the legend keys to make your selections in this sub-menu, press the [Esc] key to return to the Main
menu.
Item Specific Help
IDE Primary Slave [CD-ROM]
PhoenixBIOS Setup Utility
F1 Help Select Item Change Values F9 Setup Defaults
Esc Exit Select Menu Enter Select Sub-Menu F10 Save and Exit
Main Advanced Security Power Boot Exit
This setting enables
or disables 32 bit IDE
data transfers.
Type: [Auto]
Multi-Sector Transfers: [Disabled]
LBA Mode Control: [Disabled]
32 Bit I/O: [Disabled]
Transfer Mode: [Standard]
Ultra DMA Mode: [Disabled]