User Guide

3
Getting to know your FHD120
LED indications
Mode Light eect Descriptions
Standby mode (USB 2.0) Static green Connected to PC’s USB 2.0 port, HDMI IN unplugged
Standby mode (USB 3.2 Gen1x1) Static blue Connected to PC’s USB 3.2 Gen1x1 port, HDMI IN unplugged
Working mode (Party mode o) Rainbow eect Connected to PC’s USB port, HDMI IN plugged
Working mode (Party mode on) Color cycle eect
Connected to PC’s USB port, HDMI IN plugged, LINE OUT
connected to gamepad
HDMI signal unlock
Yellow strobing eect HDMI unplugged
Red strobing HDMI signal abnormal
EDID fail Red breathing eect Resolution for pass-through not supported
HDCP Detect/resolution change
unsupported
Static red HDCP is detected/ Upscaling or downscaling is failed
Device/USB abnormal Red strobing eect Device or USB error
HDMI input interrupt
Yellow strobing eect HDMI signal undetected (within 30 seconds)
Static warm white HDMI signal undetected (over 30 seconds)
Firmware upgrading
Orange breathing eect Firmware upgrading
Static orange Firmware upgraded successfully
Red strobing eect Firmware upgrade fail
English
Rear viewFront view
1. Headset port
2. Game pad port
3. LED indicator
4. USB 3.2 Gen1x1 Type-C®
5. HDMI IN port
6. HDMI OUT port