Upgrade Guide

ManualsBrandsAsus ManualsROG - Republic Of GamersG512LU

Notebook PC Upgrade Guide

E15910

Upgrade Guide

Removing the compartment cover

A. Remove the screw(s) from the Notebook PC’s compartment cover.

B. Loosen the Pop-open Screw without removing the screw from

the cover.

C. To prevent pulling on and causing damage to the cables

connected, slightly lift the cover to reveal the compartment

without removing the cover completely.

Pop-open Screw

Summary of content (8 pages)

PAGE 1
E15910 Upgrade Guide Removing the compartment cover A. Remove the screw(s) from the Notebook PC’s compartment cover. B. Loosen the Pop-open Screw without removing the screw from the cover. C. To prevent pulling on and causing damage to the cables connected, slightly lift the cover to reveal the compartment without removing the cover completely.
PAGE 2
To reattach the compartment cover: A. Align and reattach the cover of the compartment. B. Secure the cover using the screw(s) you removed earlier. C. Tighten the Pop-open Screw.
PAGE 3
Cover screw map M2.5 X 12 (5PCS) M2.5 X 7.5 (5PCS) M2.
PAGE 4
Installing a RAM module Upgrade the memory capacity of your Notebook PC by installing a RAM (Random Access Memory) module in the memory module compartment. The following steps show you how to install a RAM module into your Notebook PC: WARNING! Disconnect all the connected peripherals, any telephone or telecommunication lines and power connector (such as external power supply, battery pack, etc.) before removing the compartment cover.
PAGE 5
A. Remove the compartment cover. NOTE: For more details, refer to the Removing the compartment cover section in this manual. B. Align and insert the RAM module into the RAM module slot. C. Push down the RAM module until it clicks in place.
PAGE 6
Installing an M.2 card Refer to the following steps when installing a compatible M.2 card in your Notebook PC: IMPORTANT! Purchase your M.2 card from authorized retailers of this Notebook PC to ensure maximum compatibility and reliability. WARNING! Disconnect all the connected peripherals, any telephone or telecommunication lines and power connector (such as external power supply, battery pack, etc.) before removing the compartment cover.
PAGE 7
A. Remove the compartment cover. NOTE: For more details, refer to the Removing the compartment cover section in this manual. B. Align and insert the M.2 card into its card module slot. C. Secure the M.2 card in place using the bundled screw(s). M.2 slot II M.2 slot III M.2 slot I NOTE: The M.2 2280 slot II supports PCIe (NVMe) SSD while slot I and slot III support both PCIe (NVMe) SSD and SATA SSD.
PAGE 8
Notebook PC Upgrade Guide