Upgrade Guide

ManualsBrandsAsus ManualsGaming SeriesG513QE

Notebook PC Upgrade Guide

E18127

Upgrade Guide

Removing the compartment cover

A. Remove the screw(s) from the Notebook PC’s compartment cover.

B. Loosen the Pop-open Screw without removing the screw from

the cover.

C. To prevent pulling on and causing damage to the cables

connected, slightly lift the cover to reveal the compartment

without removing the cover completely.

Pop-open Screw

NOTE: Use a PH1 screwdriver for the screws specied in this manual.

Summary of content (8 pages)

PAGE 1
E18127 Upgrade Guide NOTE: Use a PH1 screwdriver for the screws specified in this manual. Removing the compartment cover A. Remove the screw(s) from the Notebook PC’s compartment cover. B. Loosen the Pop-open Screw without removing the screw from the cover. C. To prevent pulling on and causing damage to the cables connected, slightly lift the cover to reveal the compartment without removing the cover completely.
PAGE 2
To reattach the compartment cover: A. Align and reattach the cover of the compartment. B. Secure the cover using the screw(s) you removed earlier. C. Tighten the Pop-open Screw.
PAGE 3
Cover screw map Model G533QS G513QR GL543IR G533QR G513QM GL543IM G533QM G513IR PX513QR G543QS G513IM PX513QM G543QR GL543QR PX513IR G543QM GL543QM PX513IM M2.5 X 12 (7PCS) M2.5 X 6 (3PCS) M2.
PAGE 4
Model G513QC GL543QC PX513QC G513QE GL543QE PX513QE G513QH GL543QH PX513QH G513IC GL543IC PX513IC G513IE GL543IE PX513IE G513IH GL543IH PX513IH M2.5 X 9 (7PCS) M2.5 X 4.5 (3PCS) M2.
PAGE 5
Installing a RAM module Upgrade the memory capacity of your Notebook PC by installing a RAM (Random Access Memory) module in the memory module compartment. The following steps show you how to install a RAM module into your Notebook PC: WARNING! Disconnect all the connected peripherals, any telephone or telecommunication lines and power connector (such as external power supply, battery pack, etc.) before removing the compartment cover.
PAGE 6
A. Remove the compartment cover. NOTE: For more details, refer to the Removing the compartment cover section in this manual. B. Align and insert the RAM module into the RAM module slot. C. Push down the RAM module until it clicks in place.
PAGE 7
Installing an M.2 card Refer to the following steps when installing a compatible M.2 card in your Notebook PC: IMPORTANT! Purchase your M.2 card from authorized retailers of this Notebook PC to ensure maximum compatibility and reliability. WARNING! Disconnect all the connected peripherals, any telephone or telecommunication lines and power connector (such as external power supply, battery pack, etc.) before removing the compartment cover. NOTE: • The appearance of your Notebook PC’s bottom view and M.
PAGE 8
A. Remove the compartment cover. NOTE: For more details, refer to the Removing the compartment cover section in this manual. B. Align and insert the M.2 card into its card module slot. C. Secure the M.2 card in place using the bundled screw(s).