User Manual

3-16
Chapter 3: BIOS Setup
Chapter 3
When system is in sleep, hibernate or soft off states
This item allows you to turn the RGB LED lighting on or off when the system is in the
sleep, hibernate or soft off states. Conguration options: [All On] [Stealth] [Aura Only]
[Aura Off]
Realtek 2.5G LAN Controller
This item allows you to enable or disable the Realtek 2.5G LAN controllers. Conguration
options: [On] [Off]
Realtek PXE OPROM
This item allows you to enable or disable the Realtek PXE OPROM. Conguration options:
[On] [Off]
Intel LAN Controller
This item allows you to enable or disable the Intel LAN controllers. Conguration options:
[On] [Off]
Intel LAN OPROM
This item allows you to enable or disable the Intel PXE OPROM. Conguration options: [On]
[Off]
Wi-Fi Controller
This item allows you to enable or disable the Wi-Fi controller.
Conguration options: [Disabled] [Enabled]
USB power delivery in Soft Off state (S5)
This item allows you to enable or disable USB power delivery when the system is at Power
State S5. Conguration options: [Disabled] [Enabled]
3.6.6 APM Configuration
The items in this menu allow you to set system wake and sleep settings.
ErP Ready [Disabled]
This item allows you to switch off some power at S4+S5 or S5 to get the system ready
for ErP requirement. When set to [Enabled], all other PME options are switched off.
Conguration options: [Disabled] [Enable(S4+S5)] [Enable(S5)]
Restore AC Power Loss
This item allows your system to go to ON state, OFF state, or both states after an AC power
loss. When setting your system to [Last State], it goes to the previous state before the AC
power loss. Conguration options: [Power Off] [Power On] [Last State]
Power On By PCI-E
This item allows you to enable or disable the Wake-on-LAN function of the onboard LAN
controller or other installed PCI-E LAN cards. Conguration options: [Disabled] [Enabled]
Power On By RTC
This item allows you to enable or disable the RTC (Real-Time Clock) to generate a wake
event and congure the RTC alarm date. When enabled, you can set the days, hours,
minutes, or seconds to schedule an RTC alarm date. Conguration options: [Disabled]
[Enabled]