User Manual
20
BIOS Setup
Graphics Configuration
Allows you to select a primary display from CPU, PCIE and PCI graphical devices.
Primary Display [Auto]
Allows you to select the primary display from CPU, PCIE and PCI graphics devices.
Conguration options: [Auto] [CPU Graphics] [PCIE] [PCI]
iGPU Multi-Monitor [Disabled]
This item allows you to empower both integrated and discrete graphics devices for the
multi-monitor output. The CPU graphics shared system memory size is xed at 64 MB.
Conguration options: [Disabled] [Enabled]
RC6(Render Standby) [Enabled]
Allows you to enable or disable render standby support. Conguration options:
[Disabled] [Enabled]
DVMT Pre-Allocated [64M]
Allows you to select the DVMT 5.0 pre-allocated (xed) graphics memory size used by
the internal graphics device. Conguration options: [32M] [64M] [96M] [128M] [160M]
[192M] [224M] [256M] [288M] [320M] [352][384][416][448][480][512][1024]
DMI/OPI Configuration
This item allows you to control various DMI (direct media interface) to run at PCI-E 3.0 speed.
DMI Max Link Speed [Auto]
Allows you to congure the DMI speed. Conguration options: [Auto] [Gen1] [Gen2]
[Gen3]
PEG Port Configuration
Allows you to congure the PEG Port settings.
PCIEx16_1 Link Speed [Auto]
Allows you to congure the PCIEx16 speed for slot 1. Conguration options: [Auto]
[Gen1] [Gen2] [Gen3]
Memory Configuration
Allows you to congure the memory conguration parameters.
Memory Remap [Enabled]
Set this item to [Enabled] to support DRAM address remapping for 64-bit operating
systems. Conguration options: [Enabled] [Disabled]
PCH Configuration
PCI Express Configuration
This item allows you to congure the PCI Express slots.
PCI-E Speed [Auto]
This item allows your system to automatically select the PCI Express port speed. When
set to [Gen1], the PCI-E port runs at PCI-E 1.0 speed. When set to [Gen2], the PCI-E
port runs at PCI-E 2.0 speed. Conguration options: [Auto] [Gen1] [Gen2]