Installation guide

ASUS GigaX1024P/GigaX1024 7
English
2. Plug one end of the power cable to the power connector on the switch
rear panel, then plug the other end to an electrical outlet.
3. The Power LED and LED indicators for active Ethernet ports light up to
indicate that the device is on and in use. Refer to the front panel
Label/LED table for LED indications.
4 For GigaX1024P only, you can install ASUS CNM in any Windows OS
and use CNM to manage the switch. For CNM details, please refer to
CNM manual in the CD-ROM. You also can download the CNM software
and manual from the ASUS website.