User Manual

Quick Start Guide 5
English
Placement options
Desktop placement
PlacetheGX1105N/GX1108Nswitchonaatandstablesurface.Makesure
thatthelocationmeetstheoperatingenvironmentspecication.Seepage3for
details.
NOTE:
The length of the UTP Category 5 cable length cannot exceed 100
meters (328 feet).
Wall mounting
You can mount the GX1105N/ GX1108N switch on a wall with the supplied
mounting screws.
To mount the switch on a wall:
1. Measure the distance between the two hooks on the bottom of the switch.
2. Mark the screw position on the wall with the same distance in between.
3. Secure the supplied screws on the wall until only 1/4 is showing.
4. Latch the hooks of the GX1105N/ GX1108N onto the screws.
Bottom Side
Secure two screws on the wall
Latch the switch
onto the screws.
1
2
Figure 5. Wall-mount installation