User Manual

30
GigaX2024B L2 Managed Switch User Manual
4.5.9 Static addresses
You can add a MAC address into the switch address table. The MAC address
added by this way will not age out from the address table. We call it static
address. The switch only allows 1024 static addresses.
MAC Address:
enter the MAC address
VLAN ID:
enter the VLAN ID that the MAC belongs
Port Selection:
select the port which the MAC belongs
Click on the
Add
when you create a new static MAC address by the above
information. Then you will see the new added entry shows in the address
window. You can remove the existed address by selecting the entry with the
mouse, then clicking on
Remove
. The
Modify
button updates the existed MAC
address entries. You can look up a static address entry by MAC address and
VLAN ID, then click on the
Query
. Click
OK
to make the setting send to the
switch (HTTP server). Click
Reload
to refresh the settings to current value. To
make the configuration effective, please go to
Save Configuration
page, then
click
Save
.
Figure 30.Static Address