User Manual

37
GigaX2024B L2 Managed Switch User Manual
4.6.2 Host table
This page links host IP address to the community name that is entered in
Community Table page. Type an IP address and select the community name
from the drop-down list. Click
OK
to save the configuration permanently or
Reload
to refresh the page.
Figure 38. Host table
4.6.3 Trap setting
By setting trap destination IP addresses and community names, you can enable
SNMP trap function to send trap packets in different versions (v1 or v2c). Click
to save the configuration permanently or to refresh the page.
Figure 34. Trap setting