User Manual

42
GigaX2024B L2 Managed Switch User Manual
The Filter Rule page provides options for rule modes, one is MAC rule and the
other is IP rule. If you did not enter the MAC address in the blank box, it means
the rule donʼt care the MAC value. In IP rule setup, you can enter any of the 5
types: source IP, destination IP, protocol, source application port and destination
application port. The
Action
field determines if the packet should be dropped or
forwarding when it matches the rule. If a packet matches two rules with different
action, the packet will follow the rule showed first in the rule list.
Figure 44. Filter rule in MAC mode
Figure 45. Filter rule in IP mode
Two examples tell us about the how of IP provisioning:
1. Assign a dedicated IP , Type = subnet, IP = 10.10.1.2, Wildcard = 0.0.0.0
2. Assign a subnet (a group of IP), Type = subnet, IP = 10.10.1.0, Wildcard =
0.0.0.255