User Manual

49
GigaX2024B L2 Managed Switch User Manual
Figure 50. Port security
4.8.4.2 Port status
This page shows the current port status, MAC address counts, static MAC
address counts, and violation count.
Port has five statuses:
a)
NoOper:
This indicates port security on the port is configured to disabled.
b)
SecureUp:
This indicates port security is operational.
c)
SecureDown:
This indicates port security is not operational. This happens
when port security is configured to be enabled but could not be enabled due
to certain reasons such as conflict with other features.
d)
Restrict:
This indicates that the port occurs port security violation when the
violation mode is ʻrestrictʼ.
e)
Shutdown:
This indicates that the port is shutdown due to port security
violation when the violation mode is ʻshutdownʼ.
When some port status is “Shutdown”, you can click it and select “Re-Start”
to “Yes”. It will restart the port and change status to “SecureUp”. Please click
Modify
when youʼre done with the modification.
Click
OK
to make the settings permanent. Click
Reload
to refresh the settings to
current value.