User guide

GigaX Series L2 Managed Switch User Guide
Name: enter Name combined with Engine ID that should match the Name
and Engine ID in the Manager.
Auth Protocol: enter the Auth Protocol that Engine ID and Name belong.
Only NoAuth ,MD5, SHA1 can be chosen. If the NoAuth is chosen, there
is no need to enter password.
Auth Password: enter the password that the Auth Protocol belongs. The
password needs at least 8 characters or digits.
Priv Protocol: enter the Priv Protocol that Engine ID and Name belong.
Only NoPriv ,DES can be chosen. If the NoPriv is chosen, there is no
need to enter password.
Priv Password: enter the password that the Priv Protocol belongs. The
password needs at least 8 characters or digits.
Click on the
when you create a new USM User entry by the above
information. Then you will see the new added entry shows in the User window.
You can remove the existed User by selecting the entry with the mouse, then
clicking on
. The button updates the existed USM User
entries. Click
to save effective. Click to refresh the
settings to current value. To make the configuration effective, please go to
"Save Configuration" page, then click on
.
61