User's Manual
Table Of Contents
- Chapter 1
- Chapter 2
- Chapter 3
- BIOS setup
- 3.1 BIOS setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 PCH-FW Configuration
- 3.3.2 Trusted Computing
- 3.3.3 CPU Configuration
- 3.3.4 Graphics Configuration
- 3.3.5 PCI Express Configuration
- 3.3.6 CSM Configuration
- 3.3.7 Super IO Configuration
- 3.3.8 Serial Console Configuration
- 3.3.9 SATA Configuration
- 3.3.10 USB Configuration
- 3.3.11 Onboard Devices Configuration
- 3.3.12 APM Configuration
- 3.3.13 EzFlash
- 3.3.14 Watchdog Timer
- 3.3.15 Network Stack Configuration
- 3.3.16 Miscellaneous
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- BIOS setup
- Appendix
3-14
H110A-IM-A
USB Support
[Disabled] All USB devices will not be available until OS boot up for
a fastest POST time.
[Full Initial] All USB devices will be available during POST. This
process will extend the POST time.
[Partial Initial] For a faster POST time, only the USB ports with keyboard
and mouse connections will be detected.
PS/2 Devices Support
Select any of these settings when PS/2 devices are installed. These settings
only apply when Fast Boot is enabled.
[Enabled] PS/2 devices will be available during POST at any
circumstances. This process will extend POST time.
[Disabled] For the fastest POST time, all PS/2 devices will not be
available until your computer enters the operating system.
Network Stack Driver Support
[Disabled] Select to skip the network stack driver from loading during
POST.
[Enabled] Select to load the network stack driver during POST.
Redirection Support
[Disabled] Select to skip the redirection function during POST.
[Enabled] Select to enable the redirection function driver during
POST.
Boot mode select
Allows you to select the boot mode. Conguration options: [LEGACY] [UEFI]
FIXED BOOT ORDER Priorities
Boot Option #1~#6
This item allows you to set the system boot order. Conguration options: [Hard
Disk] [NVME] [CD/DVD] [SD] [USB Device] [Network] [Disabled]