User Manual
Table Of Contents
- Chapter 1
- Chapter 2
- Chapter 3
- BIOS setup
- 3.1 BIOS setup program
- 3.2 Main menu
- 3.3 Ai Tweaker menu
- 3.3.1 CPU Power Enhancement
- 3.3.2 CPU Core Ratio
- 3.3.3 DRAM Odd Ratio Mode
- 3.3.4 DRAM Frequency
- 3.3.5 Power-saving & Performance Mode
- 3.3.6 DRAM Timing Control
- 3.3.7 DIGI+ VRM
- 3.3.8 Internal CPU Power Management
- 3.3.9 CPU Core/Cache Current Limit Max.
- 3.3.10 CPU Graphics Current Limit
- 3.3.11 Min. CPU Cache Ratio
- 3.3.12 Max. CPU Cache Ratio
- 3.3.13 Max. CPU Graphics Ratio
- 3.3.14 DRAM Voltage
- 3.3.15 DRAM REF Voltage Control
- 3.4 Advanced menu
- 3.4.1 Platform Misc Configuration
- 3.4.2 CPU Configuration
- 3.4.3 System Agent (SA) Configuration
- 3.4.4 PCH Configuration
- 3.4.5 PCH Storage Configuration
- 3.4.6 PCH-FW Configuration
- 3.4.7 Onboard Devices Configuration
- 3.4.8 APM Configuration
- 3.4.9 Serial Console Redirection
- 3.4.10 PCI Subsystem Settings
- 3.4.11 USB Configuration
- 3.4.12 Network Stack Configuration
- 3.4.13 HDD Secure Erase
- 3.4.14 HDD/SSD SMART Information
- 3.5 Monitor menu
- 3.6 Boot menu
- 3.7 Tool menu
- 3.8 Exit menu
- BIOS setup
- Appendix
H310A-EM-A
2-22
11. Keyboard and Mouse Port connector (8-pin KBMS_CON)
The Keyboard and Mouse Port connector allows you to connect a PS/2
keyboard and mouse.
Pins Signal Pins Signal
1 O_KB_CLK_R 2 O_MS_CLK_R
3 O_KB_DATA_R 4 O_MS_DATA_R
5 GND 6 GND
7 +5V_ZPS2 8 +5V_ZPS2
O_MS_CLK_R
O_MS_DATA_R
GND
+5V_ZPS2
O_KB_CLK_R
O_KB_DATA_R
GND
+5V_ZPS2
KBMS_CON
PIN 1
NOTE: The serial port cables are purchased separately.
12. Serial Port headers (10-1 pin COM3-6)
The Serial Port headers are for serial (COM) ports. Connect the serial port
cables to these headers, then install the module to a slot opening at the back
of the system chassis.
COM3
PIN 1
DCD#
TXD
GND
RTS#
Ring
RXD
DTR#
DSR#
CTS#
A
B
A
COM4
B
COM5
C
COM6
D
C
D