User Manual
Table Of Contents
- Chapter 1
- Chapter 2
- Chapter 3
- BIOS setup
- 3.1 BIOS setup program
- 3.2 Main menu
- 3.3 Ai Tweaker menu
- 3.3.1 CPU Power Enhancement
- 3.3.2 CPU Core Ratio
- 3.3.3 DRAM Odd Ratio Mode
- 3.3.4 DRAM Frequency
- 3.3.5 Power-saving & Performance Mode
- 3.3.6 DRAM Timing Control
- 3.3.7 DIGI+ VRM
- 3.3.8 Internal CPU Power Management
- 3.3.9 CPU Core/Cache Current Limit Max.
- 3.3.10 CPU Graphics Current Limit
- 3.3.11 Min. CPU Cache Ratio
- 3.3.12 Max. CPU Cache Ratio
- 3.3.13 Max. CPU Graphics Ratio
- 3.3.14 DRAM Voltage
- 3.3.15 DRAM REF Voltage Control
- 3.4 Advanced menu
- 3.4.1 Platform Misc Configuration
- 3.4.2 CPU Configuration
- 3.4.3 System Agent (SA) Configuration
- 3.4.4 PCH Configuration
- 3.4.5 PCH Storage Configuration
- 3.4.6 PCH-FW Configuration
- 3.4.7 Onboard Devices Configuration
- 3.4.8 APM Configuration
- 3.4.9 Serial Console Redirection
- 3.4.10 PCI Subsystem Settings
- 3.4.11 USB Configuration
- 3.4.12 Network Stack Configuration
- 3.4.13 HDD Secure Erase
- 3.4.14 HDD/SSD SMART Information
- 3.5 Monitor menu
- 3.6 Boot menu
- 3.7 Tool menu
- 3.8 Exit menu
- BIOS setup
- Appendix
3-4
H310A-EM-A
4. From the Conrm New Password box, key in your password again to
conrm the password, then click OK.
To clear the user password, follow the same steps as in changing a user
password, but click OK when prompted to create/conrm the password. After you
clear the password, the User Password item on top of the screen shows Not
Installed.
3.3 Ai Tweaker menu
The Ai Tweaker menu items allow you to congure overclocking-related items.
CAUTION! Be cautious when changing the settings of the Ai Tweaker menu items.
Incorrect eld values can cause the system to malfunction.
NOTE: The conguration options for this section vary depending on the CPU and DIMM
model you installed on the motherboard.
3.3.1 CPU Power Enhancement
This item allows you to reset the CPU load-line to the Intel default settings.
Conguration options: [Auto] [Disabled]
3.3.2 CPU Core Ratio
This item allows you to set the CPU core ratio limit per core or synchronize
automatically to all cores.
Conguration options: [Auto] [Sync All Cores] [Per Core]
NOTE: When the CPU Core Ratio is set to [Sync All Cores] or [Per Core], the following
item appears.
1-Core Ratio Limit
Enter [Auto] to apply the CPU default Turbo Ratio setting or manually
assign a 1-Core Limit value that must be higher than or equal to the 2-Core
Ratio Limit.
NOTE: When the CPU Core Ratio is set to [Per Core], the following items appears.
2-Core Ratio Limit
Enter [Auto] to apply the CPU default Turbo Ratio setting or manually
assign a 2-core ratio limit that must be higher than or equal to the 3-core
ratio limit.
CAUTION! If you assign a value for 2-Core Ratio Limit, do not set the 1-Core Ratio Limit
to [Auto].