User Manual
Table Of Contents
- Chapter 1
- Chapter 2
- Chapter 3
- BIOS setup
- 3.1 BIOS setup program
- 3.2 Main menu
- 3.3 Ai Tweaker menu
- 3.3.1 CPU Power Enhancement
- 3.3.2 CPU Core Ratio
- 3.3.3 DRAM Odd Ratio Mode
- 3.3.4 DRAM Frequency
- 3.3.5 Power-saving & Performance Mode
- 3.3.6 DRAM Timing Control
- 3.3.7 DIGI+ VRM
- 3.3.8 Internal CPU Power Management
- 3.3.9 CPU Core/Cache Current Limit Max.
- 3.3.10 CPU Graphics Current Limit
- 3.3.11 Min. CPU Cache Ratio
- 3.3.12 Max. CPU Cache Ratio
- 3.3.13 Max. CPU Graphics Ratio
- 3.3.14 DRAM Voltage
- 3.3.15 DRAM REF Voltage Control
- 3.4 Advanced menu
- 3.4.1 Platform Misc Configuration
- 3.4.2 CPU Configuration
- 3.4.3 System Agent (SA) Configuration
- 3.4.4 PCH Configuration
- 3.4.5 PCH Storage Configuration
- 3.4.6 PCH-FW Configuration
- 3.4.7 Onboard Devices Configuration
- 3.4.8 APM Configuration
- 3.4.9 Serial Console Redirection
- 3.4.10 PCI Subsystem Settings
- 3.4.11 USB Configuration
- 3.4.12 Network Stack Configuration
- 3.4.13 HDD Secure Erase
- 3.4.14 HDD/SSD SMART Information
- 3.5 Monitor menu
- 3.6 Boot menu
- 3.7 Tool menu
- 3.8 Exit menu
- BIOS setup
- Appendix
3-6
H310A-EM-A
3.3.5 Power-saving & Performance Mode
Power-saving & Performance Mode lets you congure the power usage to boost or enhance
system performance.
[Auto] Automatically adjusts the power usage based on the system
load.
[Max Power-Saving Mode] Enables all power-saving settings for maximum energy-saving
condition
[Performance Mode] Disables all power-saving settings to achieve a high system
performance.
3.3.6 DRAM Timing Control
The sub-items in this menu allow you to set the DRAM timing control features. Use the
<+> and <-> keys to adjust the value. To restore the default setting, type [auto] using the
keyboard and press the <Enter> key.
CAUTION! Changing the values in this menu may cause the system to become unstable!
If this happens, revert to the default settings.
Primary Timings
DRAM CAS# Latency
Conguration option: [Auto]
DRAM RAS# to CAS# Delay
Conguration option: [Auto]
DRAM RAS# ACT Time
Conguration options: [Auto]
DRAM Command Rate
Conguration options: [Auto] [1N] [2N] [3N] [N:1]
Secondary Timings
DRAM RAS# to RAS# Delay L
Conguration option: [Auto]
DRAM RAS# to RAS# Delay S
Conguration option: [Auto]
DRAM REF Cycle Time
Conguration option: [Auto]
DRAM Refresh Interval
Conguration option: [Auto]
DRAM WRITE Recovery Time
Conguration option: [Auto]
DRAM READ to PRE Time
Conguration option: [Auto]