User Manual
Table Of Contents
- Chapter 1
- Chapter 2
- Chapter 3
- BIOS setup
- 3.1 BIOS setup program
- 3.2 Main menu
- 3.3 Ai Tweaker menu
- 3.3.1 CPU Power Enhancement
- 3.3.2 CPU Core Ratio
- 3.3.3 DRAM Odd Ratio Mode
- 3.3.4 DRAM Frequency
- 3.3.5 Power-saving & Performance Mode
- 3.3.6 DRAM Timing Control
- 3.3.7 DIGI+ VRM
- 3.3.8 Internal CPU Power Management
- 3.3.9 CPU Core/Cache Current Limit Max.
- 3.3.10 CPU Graphics Current Limit
- 3.3.11 Min. CPU Cache Ratio
- 3.3.12 Max. CPU Cache Ratio
- 3.3.13 Max. CPU Graphics Ratio
- 3.3.14 DRAM Voltage
- 3.3.15 DRAM REF Voltage Control
- 3.4 Advanced menu
- 3.4.1 Platform Misc Configuration
- 3.4.2 CPU Configuration
- 3.4.3 System Agent (SA) Configuration
- 3.4.4 PCH Configuration
- 3.4.5 PCH Storage Configuration
- 3.4.6 PCH-FW Configuration
- 3.4.7 Onboard Devices Configuration
- 3.4.8 APM Configuration
- 3.4.9 Serial Console Redirection
- 3.4.10 PCI Subsystem Settings
- 3.4.11 USB Configuration
- 3.4.12 Network Stack Configuration
- 3.4.13 HDD Secure Erase
- 3.4.14 HDD/SSD SMART Information
- 3.5 Monitor menu
- 3.6 Boot menu
- 3.7 Tool menu
- 3.8 Exit menu
- BIOS setup
- Appendix
3-21
Chapter 3: BIOS setup
SATA Controller(s) [Enabled]
Enables or disables onboard the SATA device. Conguration options: [Disabled]
[Enabled]
NOTE: The following items appear only when you set SATA Controller(s) to
[Enabled].
SATA Mode Selection [AHCI]
Determines how SATA controller(s) operate. This PCH SKU does not support RST feature.
Conguration options: [AHCI]
Aggressive LPM Support [Disabled]
This item is designed for LPM (link power management) support with a better
energy saving conditions. When disabled, the hot plug function of SATA ports are
disabled. Conguration options: [Disabled] [Enabled]
Smart Self Test [Enabled]
This item allows you to enable or disable the SMART Self Test on all HDDs during
POST. Conguration options: [Disabled] [Enabled]
SATA6G_1~4(Gray) [Enabled]
Allow you to enable/disable the SATA6G_1~4 port. Conguration options:
[Disabled] [Enabled]
SATA6G_1~4 Hot Plug [Disabled]
These items allow you to enable/disable SATA Hot Plug Support. Conguration
options: [Disabled] [Enabled]
3.4.6 PCH-FW Conguration
TPM Device Selection [Discrete TPM]
This item allows you to select the TPM device. Conguration options: [Discrete
TPM] [Firmware TPM]
3.4.7 Onboard Devices Conguration
HD Audio Controller [Enabled]
[Enabled] Enables the HD Audio Device.
[Disabled] Disables the HD Audio Device.
NOTE: The following items appear only when you set the HD Audio Controller item to
[Enabled].
Intel LAN Controller [Enabled]
[Enabled] Enables the Intel LAN controller.
[Disabled] Disables the controller.