User Manual
Table Of Contents
- Chapter 1
- Chapter 2
- Chapter 3
- BIOS setup
- 3.1 BIOS setup program
- 3.2 Main menu
- 3.3 Ai Tweaker menu
- 3.3.1 CPU Power Enhancement
- 3.3.2 CPU Core Ratio
- 3.3.3 DRAM Odd Ratio Mode
- 3.3.4 DRAM Frequency
- 3.3.5 Power-saving & Performance Mode
- 3.3.6 DRAM Timing Control
- 3.3.7 DIGI+ VRM
- 3.3.8 Internal CPU Power Management
- 3.3.9 CPU Core/Cache Current Limit Max.
- 3.3.10 CPU Graphics Current Limit
- 3.3.11 Min. CPU Cache Ratio
- 3.3.12 Max. CPU Cache Ratio
- 3.3.13 Max. CPU Graphics Ratio
- 3.3.14 DRAM Voltage
- 3.3.15 DRAM REF Voltage Control
- 3.4 Advanced menu
- 3.4.1 Platform Misc Configuration
- 3.4.2 CPU Configuration
- 3.4.3 System Agent (SA) Configuration
- 3.4.4 PCH Configuration
- 3.4.5 PCH Storage Configuration
- 3.4.6 PCH-FW Configuration
- 3.4.7 Onboard Devices Configuration
- 3.4.8 APM Configuration
- 3.4.9 Serial Console Redirection
- 3.4.10 PCI Subsystem Settings
- 3.4.11 USB Configuration
- 3.4.12 Network Stack Configuration
- 3.4.13 HDD Secure Erase
- 3.4.14 HDD/SSD SMART Information
- 3.5 Monitor menu
- 3.6 Boot menu
- 3.7 Tool menu
- 3.8 Exit menu
- BIOS setup
- Appendix
3-22
H310A-EM-A
NOTE: The following items appear only when you set the Intel LAN Controller item to
[Enabled].
Intel PXE OPROM [Disabled]
This item allows you to enable or disable the PXE Option ROM of the Intel LAN
controller.
Conguration options: [Disabled] [Enabled]
Realtek LAN Controller [Enabled]
[Enabled] Enables the Realtek LAN controller.
[Disabled] Disables the controller.
NOTE: The following items appear only when you set the Realtek LAN Controller item to
[Enabled].
Realtek PXE OPROM [Disabled]
This item allows you to enable or disable the PXE Option ROM of the Realtek LAN
controller.
Conguration options: [Disabled] [Enabled]
USB power delivery in Soft Off state (S5) [Disabled]
Allows you to disable or enable USB power when your PC is in the S5 state.
Conguration options: [Disabled] [Enabled]
PCIEX4_3 Conguration
Conguration options: [Auto] [1x4 Mode] [1x2, 2x1 Mode]
Serial Port 1 Conguration
The sub-items in this menu allow you to set the serial port conguration.
Serial Port [Enabled]
Allows you to enable or disable the serial port (COM). Conguration options:
[Disabled] [Enabled]
COM1 Control [RS232]
Allows you to select COM1 mode. Conguration options: [RS422] [RS232]
[RS485]
Serial Port 2 Conguration
The sub-items in this menu allow you to set the serial port conguration.
Serial Port [Enabled]
Allows you to enable or disable the serial port (COM). Conguration options:
[Disabled] [Enabled]