User’s Manual

2-17
Chapter 2: Motherboard information
7. Front panel system panel connector (10-1 pin F_PANEL)
Thisconnectorsupportsseveralchassis-mountedfunctions.
• System power LED (2-pin +PWR_LED)
This2-pinconnectorisforthesystempowerLED.Connectthechassis
powerLEDcabletothisconnector.ThesystempowerLEDlightsupwhen
youturnonthesystempower,andblinkswhenthesystemisinsleepmode.
• Hard disk drive activity LED (2-pin +HDD_LED)
This2-pinconnectorisfortheHDDActivityLED.ConnecttheHDDActivity
LEDcabletothisconnector.TheIDELEDlightsuporasheswhendatais
readfromorwrittentotheHDD.
• ATX power button/soft-off button (2-pin PWR_BTN)
This 2-pin connector is for the system power button.
• Reset button (2-pin RESET)
This 2-pin connector is for the chassis-mounted reset button for system
reboot without turning off the system power.
H310I-IM-A R2.0 System panel connector
PIN 1
PWR BTN
GND
PWRBTN#
PWR_LED-
PWR_LED+
(NC)
RSTCON#_PANEL
GND
HDD_LED-
HDD_LED+
F_PANEL
+PWR LED
+HDD_LED RESET
8. Serial ATA 6.0Gb/s connectors (7-pin SATA6G_1/2)
TheseconnectorconnectstoSerialATA6.0Gb/sharddiskdrivesoran
opticaldriveviaSerialATA6.0Gb/ssignalcables.
H310I-IM-A R2.0 SATA 6.0Gb/s connectors
SATA6G_2
SATA6G_1
GND
RSATA_TXP1
RSATA_TXN1
GND
RSATA_RXN1
RSATA_RXP1
GND
GND
RSATA_TXP2
RSATA_TXN2
GND
RSATA_RXN2
RSATA_RXP2
GND