User’s Manual
3-14
H310I-IM-A R2.0
CPU / MotherBoard Temperature [xxxºC/xxxºF]
The onboard hardware monitor automatically detects and displays the CPU/
motherboard temperatures. Select Ignore if you do not wish to display the detected
temperature.
CPU / Chassis Fan Speed [xxxx RPM] or [Ignore] / [N/A]
The onboard hardware monitor automatically detects and displays the CPU /
chassis fan speeds in rotations per minute (RPM). If the fan is not connected to the
motherboard, the eld shows N/A. Select Ignore if you do not wish to display the
detected speed.
CPU Core Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage
The onboard hardware monitor automatically detects the voltage output through
the onboard voltage regulators. Select Ignore if you do not want to detect this item.
Q-Fan Conguration
Q-Fan Tuning
Click [OK] button to detect the lowest speed and congure the minimum duty circle
for each fan. Do not shut down or reset your system during the tuning progress.
Conguration options: [Ok] [Cancel]
CPU Q-Fan Control [PWM Mode]
[Disabled] Disables the CPU Q-Fan control feature.
[PWM Mode] Enable the CPU Q-Fan control in PWM mode for 4-pin CPU fan.
CPU Fan Speed Low Limit [200 RPM]
This item appears only when you enable the CPU Q-Fan Control feature and
allows you to disable or set the CPU fan warning speed. Conguration options:
[Ignore] [200RPM] [300 RPM] [400 RPM] [500 RPM] [600RPM]
CPU Fan Prole [Standard]
This item appears only when you enable the CPU Q-Fan Control feature and
allows you to set the appropriate performance level of the CPU fan.
[Standard] Sets to [Standard] to make the CPU fan automatically adjust
depending on the CPU temperature.
[Silent] Sets to [Silent] to minimize the fan speed for quiet CPU fan
operation.
[Turbo] Sets to [Turbo] to achieve maximum CPU fan speed.
[Manual] Sets to [Manual] to assign detailed fan speed control parameters.
The following four items appear only when you set CPU Fan Prole to
[Manual].