User’s Manual
3-8
H310I-IM-A R2.0
PEGPortConguration
Allows you to congure the PEG Port settings.
PCIEX16_1 Link Speed [Auto]
Allows you to congure the PCIEX16_1 speed. Conguration options: [Auto]
[Gen1] [Gen2] [Gen3]
MemoryConguration
Memory Remap [Enabled]
Allows you to enable or disable remapping the memory above 4GB.
Conguration options: [Disabled] [Enabled]
3.3.4 PCHConguration
PCIExpressConguration
PCIe Speed [Auto]
Allows you to congure the PCIe speed. Conguration options: [Auto] [Gen1]
[Gen2]
IOAPIC 24-119 Entries [Enabled]
Sets to whether allow IOAPIC 24-119 Entries to expand to PIRQI-PIRQX.
Conguration options: [Disabled] [Enabled]
3.3.5 PCHStorageConguration
While entering Setup, the BIOS automatically detects the presence of SATA
devices. The SATA Port items show Empty if no SATA device is installed to the
corresponding SATA port.
SATA Controller(s) [Enabled]
Enables or disables onboard the SATA device. Conguration options: [Disabled]
[Enabled]
The following items appear only when you set SATA Controller(s) to [Enabled].
Aggressive LPM Support [Disabled]
This item is designed for LPM (link power management) support with a better
energy saving conditions. When disabled, the hot plug function of SATA ports are
disabled. Conguration options: [Disabled] [Enabled]
Smart Self Test [Enabled]
This item allows you to enable or disable the SMART Self Test on all HDDs during
POST. Conguration options: [Disabled] [Enabled]