User’s Manual

3-13
Chapter 3: BIOS setup
Legacy USB Support [Enabled]
[Enabled] Enables the support for USB devices on legacy operating
systems (OS).
[Disabled] USB devices are only available when running BIOS Setup.
[Auto] Allows the system to detect the presence of USB devices
at startup. If detected, the USB controller legacy mode is
enabled. If no USB device is detected, the legacy USB support
is disabled.
USB Keyboard and Mouse Simulator [Disabled]
Enable this item to simulate USB keyboard and mouse to PS/2 module in
Windows
®
7. Ensure that you have installed the USB driver in your system before
you disable this item. Conguration options: [Enable] [Disabled]
USB Single Port Control
This item allows you to enable or disable the individual USB ports.
Refer to the manual for the location of the USB ports.
3.3.11 NetworkStackConguration
Network Stack [Disabled]
This item allows user to disable or enable the UEFI network stack. Conguration
options: [Disabled] [Enabled]
The following two items appear only when you set the previous item to
[Enabled].
Ipv4 PXE Support [Enabled]
This item allows user to disable or enable the Ipv4 PXE Boot support.
Conguration options: [Disabled] [Enabled]
Ipv6 PXE Support [Enabled]
This item allows user to disable or enable the Ipv6 PXE Boot support.
Conguration options: [Disabled] [Enabled]
3.3.12 HDD/SSD SMART Information
This menu displays the SMART information of the connected devices.
3.4 Monitor menu
The Monitor menu displays the system temperature/power status, and allows you
to change the fan settings.