User's Manual
H310I-IM-B
2-18
CAUTION: Do not forget to connect the fan cables to the fan connectors.
Insufcient air ow inside the system may damage the motherboard
components. These are not jumpers! Do not place jumper caps on the fan
connectors!
5. CPU and chassis fan connectors (4-pin CPU_FAN, 4-pin CHA_FAN)
Connect the fan cables to the fan connectors on the motherboard, ensuring
that the black wire of each cable matches the ground pin of the connector.
H310I-IM-B Fan connectors
CHA_FAN
CPU_FAN
GND
12V
FAN_IN
FAN_PWM
O_CHAFAN_PWM
O_CHAFANIN1
CHA FAN PWR
GND
6. TPM connector (14-1 pin SPI_TPM)
This connector supports a Trusted Platform Module (TPM) system with a
Serial Peripheral Interface (SPI), allowing you to securely store keys, digital
certicates, passwords and data. A TPM system also enhances network
security, protects digital identities, and ensures platform integrity.
H310I-IM-B TPM connector
PIN 1
F_SPI_HOLD#
T_SPI_MISO
S_SPI_CS1#_R
+3V_SPI
NC
S_PLTRST#_Onboard
VCCSPI
T_SPI_MOSI
T_SPI_CLK
GND
F_BIOS_WP#
S_SPI_TPM_CS2#
S_SPI_TPM_IRQ#
TPM
Connector type
Header 2x7p, K14, 2.0mm pitch
Connector type
WAFER HD 4p, 2.54mm pitch, S/T