User's Manual
3-6
H310I-IM-B
3.3.7 PCH Storage Configuration
While entering Setup, the BIOS automatically detects the presence of SATA
devices. The SATA Port items show Empty if no SATA device is installed to the
corresponding SATA port.
SATA Controller(s)
Enables or disables onboard the SATA device. Conguration options: [Disabled]
[Enabled]
The following items appear only when you set SATA Controller(s) to [Enabled].
Smart Self Test
This item allows you to enable or disable the SMART Self Test on all HDDs during
POST. Conguration options: [Disabled] [Enabled]
SATA Mode Selection
This item allows you to set the SATA conguration.
[AHCI] Set to [AHCI] when you want the SATA hard disk drives to
use the AHCI (Advanced Host Controller Interface). The AHCI
allows the onboard storage driver to enable advanced Serial
ATA features that increases storage performance on random
workloads by allowing the drive to internally optimize the order
of commands.
[Intel RST Premium With
Intel Optane System
Acceleration]
Set to [Intel RST Premium With Intel Optane System
Acceleration] when you want to create a RAID conguration
from the SATA hard disk drives.
Aggressive LPM Support
This item is designed for LPM (link power management) support with a better
energy saving conditions. When disabled, the hot plug function of SATA ports are
disabled. Conguration options: [Disabled] [Enabled]
Hot Plug
These items allow you to enable/disable SATA Hot Plug Support. Conguration
options: [Disabled] [Enabled]
SATA6G_1~4(Gray)
Allow you to enable/disable the SATA6G_1~4 port. Conguration options:
[Disabled] [Enabled]
3.3.8 Onboard Devices Configuration
HD Audio Controller
[Enabled] Enables the HD Audio Device.