User's Manual
3-10
H310I-IM-B
Change Settings
Allows you to select an optimal setting for Super I/O devices. Conguration
options: [Auto] [IO=3E8h; IRQ=7;] [IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12;] [IO=2E8h;
IRQ=3,4,5,6,7,9,10,11,12;] [IO=2F0h; IRQ=3,4,5,6,7,9,10,11,12;] [IO=2E0h;
IRQ=3,4,5,6,7,9,10,11,12;]
Serial Port 4 Configuration
Serial Port
Allows you to enable or disable the serial port (COM).Conguration options:
[Disabled] [Enabled]
The following item appears only when you set Serial Port to [Enabled].
Change Settings
Allows you to select an optimal setting for Super I/O devices. Conguration
options: [Auto] [IO=2E8h; IRQ=7;] [IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12;] [IO=2E8h;
IRQ=3,4,5,6,7,9,10,11,12;] [IO=2F0h; IRQ=3,4,5,6,7,9,10,11,12;] [IO=2E0h;
IRQ=3,4,5,6,7,9,10,11,12;]
3.3.13 NCT6116D HW Monitor
Q-Fan Configuration
CPU Q-Fan Control
[Disabled] Disables the CPU Q-Fan control feature.
[PWM Mode] Enable the CPU Q-Fan control in PWM mode for 4-pin CPU fan.
CPU Fan Step UP/Down
This item appears only when you enable the CPU Q-Fan Control feature and
allows you to set the CPU Fan Step Up/Down time.
Conguration options: [0 sec] [2.1 sec] [2.8 sec] [3.6 sec] [4.2 sec] [5.0 sec] [6.3
sec] [8.5 sec] [12 sec] [25 sec]
CPU Fan Speed Low Limit
This item appears only when you enable the CPU Q-Fan Control feature and
allows you to disable or set the CPU fan warning speed. Conguration options:
[Ignore] [200RPM] [300 RPM] [400 RPM] [500 RPM] [600RPM]
CPU Fan Profile [Standard]
This item appears only when you enable the CPU Q-Fan Control feature and
allows you to set the appropriate performance level of the CPU fan.
[Standard] Sets to [Standard] to make the CPU fan automatically adjust
depending on the CPU temperature.
[Silent] Sets to [Silent] to minimize the fan speed for quiet CPU fan
operation.
[Turbo] Sets to [Turbo] to achieve maximum CPU fan speed.
[Manual] Sets to [Manual] to assign detailed fan speed control parameters.