User Manual

3-11
Chapter 3: BIOS setup
LAN2 RTL8111H
[Enabled] Enables the Intel LAN2 controller.
[Disabled] Disables the controller.
M.2 WiFi
Allow you to enable or disable M.2 WiFi function. Conguration options: [Enabled]
[Disabled]
M.2 BT
Allow you to enable or disable M.2 BT function. Conguration options: [Enabled]
[Disabled]
3.3.15 APM Configuration
ErP Ready
Allows you to switch off some power at S5 to get the system ready for ErP
requirement. When set to [Enabled], all other PME options will be switched off.
Conguration options: [Disabled] [Enabled]
Restore AC Power Loss
[S5 State] The system goes into off state after an AC power loss.
[S0 State] The system goes into on state after an AC power loss.
Power On By PCIE
This item allows you to enable or disable the Wake-on-LAN function of the onboard
LAN controller or other installed PCIe/PCI LAN cards. Conguration options:
[Disabled] [Enabled]
Power On By Ring
[Enabled] Enables the Ring devices to generate a wake event.
[Disabled] Disables the Ring devices to generate a wake event.
Power On By RTC
[Disabled] Disables RTC to generate a wake event.
[Single event] Allows you to generate a single wake event.
[Daily event] Allows you to generate a daily wake event.
[Weekly event] Allows you to generate a weekly wake event.
[Monthly event] Allows you to generate a monthly wake event.