User Manual
Table Of Contents
- Chapter 1
- Chapter 2
- Chapter 3
- BIOS setup
- 3.1 BIOS setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 PCH-FW Configuration
- 3.3.2 Trusted Computing
- 3.3.3 CPU Configuration
- 3.3.4 Graphics Configuration
- 3.3.5 PCI Express Configuration
- 3.3.6 Super IO Configuration
- 3.3.7 Serial Console Configuration
- 3.3.8 SATA Configuration
- 3.3.9 Network Stack Configuration
- 3.3.10 USB Configuration
- 3.3.11 NVMe Configuration
- 3.3.12 Onboard Devices Configuration
- 3.3.13 APM Configuration
- 3.3.14 EzFlash
- 3.3.14 Watchdog Timer
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- BIOS setup
- Appendix
3-5
Chapter 3: BIOS setup
Enhanced C-states
[Disabled] Disables enhanced C1 state.
[Enabled] Enables enhanced C1 state.
Power Limit 1 Override
[Disabled] Disables power limit 1.
[Enabled] Enables power limit 1.
Power Limit 2 Override
[Disabled] Disables power limit 2.
[Enabled] Enables power limit 2.
Power Limit 2
This item allows you to input the value of power limit 2 in milliwatts. If the
value is 0, BIOS will program this value as 1.25 times of Processor Base
Power (TDP). For 12.50W, enter 12500. Processor applies control policies so
that the package power does not exceed this limit.
3.3.4 Graphics Configuration
Allows you to select a primary display from IGFX, PEG and PCI graphical devices.
Primary Display
Allows you to select which of the IGFX/PEG/PCI Graphics device should be the
Primary Display. Conguration options: [Auto] [IGFX] [PEG Slot] [PCH PCI]
Internal Graphics
[Auto] Keep IGFX enabled base on the setup options.
[Disabled] Disables internal graphics.
[Enabled] Enables internal graphics.
RC6 (Render Standby)
Allows you to enable or disable render standby support. Conguration options:
[Disabled] [Enabled]
3.3.5 PCI Express Configuration
Allows you to select a PEG or PCI graphical device.
PCIEx16 (G5) Slot
PCIEx16 (G5) Slot
This item allows you to enable or disable the PCIEx16 (G5) slot.
Conguration options: [Disabled] [Enabled]
L1 Substates
This item allows you to select the PCI Express L1 Substates settings.
Conguration options: [Disabled] [L1.1] [L1.1 & L1.2]