User Manual

3-10
H610M-IM-A
3.3.9 Network Stack Configuration
Network Stack
This item allows user to disable or enable the UEFI network stack. Conguration
options: [Disabled] [Enabled]
The following two items appear only when you set the previous item to
[Enabled].
Ipv4 PXE Support
This item allows user to disable or enable the Ipv4 PXE Boot support.
Conguration options: [Disabled] [Enabled]
Ipv6 PXE Support
This item allows user to disable or enable the Ipv6 PXE Boot support.
Conguration options: [Disabled] [Enabled]
3.3.10 USB Configuration
Legacy USB Support
Conguration options: [Enabled] [Disabled] [Auto]
[Enabled] Enables Legacy USB support.
[Disabled] Keeps USB devices available only for EFI applications.
[Auto] Allows the system to detect the presence of USB devices at
startup. If any USB device(s) is detected, the USB controller
legacy mode is enabled. If none is detected, the legacy USB
support is disabled.
XHCI Hand-off
This item functions as a workaround for OSes without XHCI hand-off support. The
XHCI ownership change should be claimed by XHCI driver.
Conguration options: [Enabled] [Disabled]
USB Mass Storage Driver Support
Allows you to enable or disable USB Mass Storage Driver Support.
Conguration options: [Disabled] [Enabled]
U32G2_1/2
Allows you to enable or disable the USB port. Once set to [Disabled], any USB
devices plugged into the connector will not be detected by BIOS or OS.
Conguration options: [Disabled] [Enabled]
U32G1_3/4
Allows you to enable or disable the USB port. Once set to [Disabled], any USB
devices plugged into the connector will not be detected by BIOS or OS.
Conguration options: [Disabled] [Enabled]