User Manual
Table Of Contents
- Chapter 1
- Chapter 2
- Chapter 3
- BIOS setup
- 3.1 BIOS setup program
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 PCH-FW Configuration
- 3.3.2 Trusted Computing
- 3.3.3 CPU Configuration
- 3.3.4 Graphics Configuration
- 3.3.5 PCI Express Configuration
- 3.3.6 Super IO Configuration
- 3.3.7 Serial Console Configuration
- 3.3.8 SATA Configuration
- 3.3.9 Network Stack Configuration
- 3.3.10 USB Configuration
- 3.3.11 NVMe Configuration
- 3.3.12 Onboard Devices Configuration
- 3.3.13 APM Configuration
- 3.3.14 EzFlash
- 3.3.14 Watchdog Timer
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- BIOS setup
- Appendix
3-13
Chapter 3: BIOS setup
3.4 Hardware Monitor menu
The items in this menu provide you an overview of system status including
temperature, fan speed and voltage, and allow you to congure the smart fan.
Smart Fan Mode
Allows you to select the smart fan mode. Conguration options: [Disabled] [Normal]
[Manual Mode]
The following item appears only when you set Smart Fan Mode to [Manual
Mode].
Smart Fan Function
Chassis Fan Setting
Temperature 1(~4)
Allows you to set the value of temperature1(~4).
FD/RPM 1(~4)
Allows you to set the value of Fan Duty/PRM 1(~4) when temperature is
T1(~4).
CPU Fan Setting
Temperature 1(~4)
Allows you to set the value of temperature1(~4).
FD/RPM 1(~4)
Allows you to set the value of Fan Duty/PRM 1(~4) when temperature is
T1(~4).
3.5 Security menu
This menu allows a new password to be created or a current password to be changed. The
menu also enables or disables the Secure Boot state and lets the user congure the System
Mode state.
Administrator Password
If you have set an administrator password, we recommend that you enter the
administrator password for accessing the system.
To set an administrator password:
1. Select the Administrator Password item and press <Enter>.
2. From the Create New Password box, key in a password, then press <Enter>.
3. Conrm the password when prompted.