User Manual
Table Of Contents
- Chapter 1 Product overview
- Chapter 2 Motherboard information
- Chapter 3 BIOS setup
- 3.1 BIOS setup program
- 3.1.1 BIOS menu screen
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 PCH-FW Configuration
- 3.3.2 Trusted Computing
- 3.3.3 CPU Configuration
- 3.3.4 Power Management
- 3.3.5 Super IO Configuration
- 3.3.6 Serial Console Redirection
- 3.3.7 SATA Configuration
- 3.3.8 Network Stack Configuration
- 3.3.9 USB Configuration
- 3.3.10 NVMe Configuration
- 3.3.11 Onboard Devices Configuration
- 3.3.12 APM Configuration
- 3.3.13 EZ-Flash
- 3.3.14 Watchdog Timer
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- 3.1 BIOS setup program
- Appendix
3-5
Chapter 3: BIOS setup
Enhanced C-states
[Disabled] Disables enhanced C1 state.
[Enabled] Enables enhanced C1 state.
Power Limit 1 Override
[Disabled] Disables power limit 1.
[Enabled] Enables power limit 1.
Power Limit 2 Override
[Disabled] Disables power limit 2.
[Enabled] Enables power limit 2.
Power Limit 2
This item allows you to input the value of power limit 2 in milliwatts. If the
value is 0, BIOS will program this value as 1.25 times of Processor Base
Power (TDP). For 12.50W, enter 12500. Processor applies control policies so
that the package power does not exceed this limit.
3.3.4 Power Management
EnableACPIAutoConguration
Allow you to enable/disable the ACPI Auto conguration. Conguration options:
[Disabled] [Enabled]
Enable Hibernation
Allow you to enable or disable S4 hibernation. Conguration options: [Disabled]
[Enabled]
ACPI Sleep State
Allow you to select the ACPI sleep state. Conguration options: [Suspend
Disabled] [S3 (Suspend to RAM)]
3.3.5 SuperIOConguration
NCT6126DSuperIOConguration
SerialPort1Conguration
Serial Port
Allows you to enable or disable the serial port (COM).Conguration options:
[Disabled] [Enabled]
The following items appear only when you set Serial Port to [Enabled].
COM1 Control
Allows you to select the COM1 mode. Conguration options: [RS232] [RS422]
[RS485]