User Manual
Table Of Contents
- Chapter 1 Product overview
- Chapter 2 Motherboard information
- Chapter 3 BIOS setup
- 3.1 BIOS setup program
- 3.1.1 BIOS menu screen
- 3.2 Main menu
- 3.3 Advanced menu
- 3.3.1 PCH-FW Configuration
- 3.3.2 Trusted Computing
- 3.3.3 CPU Configuration
- 3.3.4 Power Management
- 3.3.5 Super IO Configuration
- 3.3.6 Serial Console Redirection
- 3.3.7 SATA Configuration
- 3.3.8 Network Stack Configuration
- 3.3.9 USB Configuration
- 3.3.10 NVMe Configuration
- 3.3.11 Onboard Devices Configuration
- 3.3.12 APM Configuration
- 3.3.13 EZ-Flash
- 3.3.14 Watchdog Timer
- 3.4 Hardware Monitor menu
- 3.5 Security menu
- 3.6 Boot menu
- 3.7 Exit menu
- 3.1 BIOS setup program
- Appendix
1-3
Chapter 1: General information
Internal I/O
connectors
1 x GPIO header (8-bit)
1 x LCD Panel Monitor Switch header
1 x Panel signal connector
1 x LVDS Panel VCC Power Selection jumper
1 x LVDS Panel Backlight Enable Signal Selection jumper
1 x LVDS Backlight Panel header
1 x Power in Connector
1 x Amplier
1 x Buzzer
Watch dog timer Yes
Security
SKU1: Non-TPM
SKU2: TPM IC onboard
Power
requirement
12V / 19V DC in
Operation
Temperature
0~60°C
Non-Operation
Temperature
-40~85°C
Relative Humidity 10%~95% (non-coagulation)
OS support
Windows
®
10 (64-bit)
Ubuntu
RedHat Enterprise
Fedora Workstation
OpenSUSE
Certication
EMC (CLASS B)
CE,FCC, BSMI, VCCI, RCM
Safety
CE-LVD
Form Factor Thin Mini-ITX, 170 x 170 mm
NOTE: Specications are subject to change without notice.