User Guide
Table Of Contents
- Notices
- Safety information
- Care and Cleaning
- Disposing of your old product
- ASUS contact information
- Takeback services
- Product information for EU energy label
- Chapter 1: Product introduction
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- Chapter 2: Setup
- 2.1 Adjusting the mini stands
- 2.2 Attaching the stand (arm/base)
- 2.3 Detaching the stand (for VESA wall mount)
- 2.4 Installing the cable clips
- 2.5 Adjusting the monitor
- 2.6 Connecting the cables
- 2.7 Turning on/off the monitor
- Chapter 3: General instructions
- 3.1 OSD (On-Screen Display) menu
- 3.2 Troubleshooting (FAQ)
- 3.3 Supported operating modes
- Chapter 4: Specifications summary
- 4.1 Display
- 4.2 Power
- Chapter 5: Dimension
1-3
ASUS HA3281A OLED Monitor
5.
Aspec
t
Ctrl
.
Aspect Control Button:
• Configure the aspect ratio setting.
6. Monochrome Button:
• Configure the monochrome setting.
7. DICOM Button:
• Configure the DICOM setting.
8. Stand-by Button/Stand-by Indicator:
• Turn the monitor on/off.
• The color definition of the Stand-by indicator is as the below table.
Status Description
White ON
Amber Standby mode
OFF OFF
9. Human sensor
• Detects user’s presence in front of the monitor screen. The monitor
automatically enters standby mode when no moving object in front of the
monitor is detected for longer than 60 seconds. When the user comes back,
the power resumes automatically when it detects the user’s presence. The
default setting of Human sensor is “Off”. User can activate this function
through OSD settings.
• To configure the setting, go to the Setting > Human Sensor menu.