User Guide
Table Of Contents
- Notices
- Safety information
- Care and Cleaning
- Disposing of your old product
- ASUS contact information
- Takeback services
- Product information for EU energy label
- Chapter 1: Product introduction
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- Chapter 2: Setup
- 2.1 Adjusting the mini stands
- 2.2 Attaching the stand (arm/base)
- 2.3 Detaching the stand (for VESA wall mount)
- 2.4 Installing the cable clips
- 2.5 Adjusting the monitor
- 2.6 Connecting the cables
- 2.7 Turning on/off the monitor
- Chapter 3: General instructions
- 3.1 OSD (On-Screen Display) menu
- 3.2 Troubleshooting (FAQ)
- 3.3 Supported operating modes
- Chapter 4: Specifications summary
- 4.1 Display
- 4.2 Power
- Chapter 5: Dimension
2-2
Chapter 2: Setup
2.2 Attaching the stand (arm/base)
To assemble the stand:
1. Carefully take the monitor out of the box. Hold the monitor rmly and do
not press on the panel screen when lifting to avoid any accidental damage
(Figure 1).
2. Place the monitor face down on the table, and then use a paper clip (or a
similar object) to remove the rubber cushions in the screw holes and remove
the mini stands (Figure 2).
3. Install the arm and secure it using the screws (Figure 3).
4. Install the base to the arm. Then lift the screw ring and turn it clockwise to
secure the base in place (Figure 4).
(Figure 1)
(Figure 4)
(Figure 3)
(Figure 2)