User Guide
Table Of Contents
- Notices
- Safety information
- Care and Cleaning
- Disposing of your old product
- ASUS contact information
- Takeback services
- Product information for EU energy label
- Chapter 1: Product introduction
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- Chapter 2: Setup
- 2.1 Adjusting the mini stands
- 2.2 Attaching the stand (arm/base)
- 2.3 Detaching the stand (for VESA wall mount)
- 2.4 Installing the cable clips
- 2.5 Adjusting the monitor
- 2.6 Connecting the cables
- 2.7 Turning on/off the monitor
- Chapter 3: General instructions
- 3.1 OSD (On-Screen Display) menu
- 3.2 Troubleshooting (FAQ)
- 3.3 Supported operating modes
- Chapter 4: Specifications summary
- 4.1 Display
- 4.2 Power
- Chapter 5: Dimension
2-5
ASUS HA3281A OLED Monitor
• We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
• When the panel screen is facing down, be careful not to damage the
Menu (5-way) button.
• The VESA wall mount kit (100 x 100 mm) is purchased separately.
• Use only the UL Listed Wall Mount Bracket (Screw size: M4 x 12 mm;
Screw quantity: 4pcs).
Use for the product is landscape mode only, no at direction mode.
Use suitable mounting equipment to avoid risk of injury.
• Unit is only allowed to be used in the below three directions (top openings
upwards, top openings facing sideways and no at direction). Otherwise, it
would be a failure of re enclosure and could result in re hazard.
• No adjustable VESA arm type wall mount device to be permitted for product
installation. (The color calibration sensor always oriented on top or sides of
the screen)