User Guide
Table Of Contents
- Notices
- Safety information
- Care and Cleaning
- Disposing of your old product
- ASUS contact information
- Takeback services
- Product information for EU energy label
- Chapter 1: Product introduction
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- Chapter 2: Setup
- 2.1 Adjusting the mini stands
- 2.2 Attaching the stand (arm/base)
- 2.3 Detaching the stand (for VESA wall mount)
- 2.4 Installing the cable clips
- 2.5 Adjusting the monitor
- 2.6 Connecting the cables
- 2.7 Turning on/off the monitor
- Chapter 3: General instructions
- 3.1 OSD (On-Screen Display) menu
- 3.2 Troubleshooting (FAQ)
- 3.3 Supported operating modes
- Chapter 4: Specifications summary
- 4.1 Display
- 4.2 Power
- Chapter 5: Dimension
3-1
ASUS HA3281A OLED Monitor
Chapter 3: General instructions
3.1 OSD (On-Screen Display) menu
3.1.1 How to reconīægure
Mode
Mode
Native Mode
sRGB Mode
DICOM_0lux
DICOM_50lux
DICOM_100lux
DICOM_Auto
User Mode 1
User Mode 2
ASUS HA3281A
60Hz3840x2160@HDMI-1Native Mode
1. Press the Menu (5-way) button to activate the OSD menu.
2. Move the Menu (5-way) button right to navigate through the functions.
Highlight the desired function and press the Menu (5-way) button to
activate it. If the function selected has a sub-menu, move the Menu (5-
way) button up/down to navigate through the sub-menu functions. Highlight
the desired sub-menu function and press the Menu (5-way)button or
move the Menu (5-way) button to activate it.
3. Move the Menu (5-way) button up/down to change the settings of the
selected function.
4. To exit and save the OSD menu, press the Close button or move the
Menu (5-way) left repeatedly until the OSD menu disappears.
To adjust other functions, repeat steps 1-3.