User Guide
Table Of Contents
- Notices
- Safety information
- Care and Cleaning
- Disposing of your old product
- ASUS contact information
- Takeback services
- Product information for EU energy label
- Chapter 1: Product introduction
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- Chapter 2: Setup
- 2.1 Adjusting the mini stands
- 2.2 Attaching the stand (arm/base)
- 2.3 Detaching the stand (for VESA wall mount)
- 2.4 Installing the cable clips
- 2.5 Adjusting the monitor
- 2.6 Connecting the cables
- 2.7 Turning on/off the monitor
- Chapter 3: General instructions
- 3.1 OSD (On-Screen Display) menu
- 3.2 Troubleshooting (FAQ)
- 3.3 Supported operating modes
- Chapter 4: Specifications summary
- 4.1 Display
- 4.2 Power
- Chapter 5: Dimension
3-2
Chapter 3: General Instruction
3.1.2 OSD function introduction
1. Mode
This function contains 8 sub-functions you can select for your preference.
Each mode has the Reset selection, allowing you to maintain your setting or
return to the preset mode.
Mode
Mode
Native Mode
sRGB Mode
DICOM_0lux
DICOM_50lux
DICOM_100lux
DICOM_Auto
User Mode 1
User Mode 2
ASUS HA3281A
60Hz3840x2160@HDMI-1Native Mode
• Native Mode: Best choice for document editing.
• sRGB Mode: Compatible with sRGB color space, sRGB is the best choice
for web browsing.
• DICOM_0lux/DICOM_50lux/DICOM_100lux/DICOM_Auto: Compliant
with DICOM standard, best choice for medical image checking. Select
the most suitable mode according to the brightness of the ambient light.
• User Mode 1/User Mode 2: You can save one or two ASUS Calibration
profiles as User Mode 1/User Mode 2 after executing ASUS Calibration
and then have quick access here.
Please apply the following settings while performing ASUS color calibration:
• Set output dynamic to full range.
• Set output color format to RGB.
• Set output color depth to 10 bit.