User Guide
Table Of Contents
- Notices
- Safety information
- Care and Cleaning
- Disposing of your old product
- ASUS contact information
- Takeback services
- Product information for EU energy label
- Chapter 1: Product introduction
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- Chapter 2: Setup
- 2.1 Adjusting the mini stands
- 2.2 Attaching the stand (arm/base)
- 2.3 Detaching the stand (for VESA wall mount)
- 2.4 Installing the cable clips
- 2.5 Adjusting the monitor
- 2.6 Connecting the cables
- 2.7 Turning on/off the monitor
- Chapter 3: General instructions
- 3.1 OSD (On-Screen Display) menu
- 3.2 Troubleshooting (FAQ)
- 3.3 Supported operating modes
- Chapter 4: Specifications summary
- 4.1 Display
- 4.2 Power
- Chapter 5: Dimension
3-4
Chapter 3: General Instruction
2. Image
Set the image related setting from this menu.
Mode
Image
Brightness
Contrast
Color Temp.
Gamma
Sharpness
RGB Tuning
Monochrome
Darkness
ASUS HA3281A
60Hz3840x2160@HDMI-1Native Mode
• Brightness: The adjusting range is from 0 to 100.
• Contrast: The adjusting range is from 0 to 100.
• Color Temp.: Contains 6 modes including 5000K, 5500K, 6500K, 7500K,
9300K, and 12000K.
• Gamma: Allows you to set the color mode to 2.0, 2.2, or 2.4.
• Sharpness: The adjusting range is from 0 to 100.
• RGB Tuning: Configures the color settings.
» Gain: Adjusts the gain levels for the red, green, or blue color.
» Offset: Adjusts the black level offset values for the red, green, or
blue color.
• Monochrome: Simulates the function of developing positive and negative
X-ray lms to assist users to have positive and negative lms in digital
les for inspection.
• Darkness: Adjusts the initialized 1st signal level of darkest gray level.